Linn Gear 30-TOOTH 20-PITCH SPUR GEARS LIN 20-FS-30
Steel spur gears in 20 to 2 Diametral Pitch - 14.5 deg pressure angle stocked. Other circular, metric or D. P. sizes made-to-order in 14.5 deg, 20 deg or other pressure angles from steel, nylon, phenolic, bronze, cast iron or other materials up to 96 in Dia Internal gears and ground external profiles may be provided subject to equipment limitations.
-
BrandLinn
-
Manufacturer Part Number20FS30
-
CountryUSA
-
Face Width3/8 in
-
Pitch Diameter1-1/2 in
-
MaterialSteel
-
Pressure Angle14.5 deg
-
TypeRough Bore
-
Hub Diameter1.35 in
-
Diametral Pitch20
-
Number of Teeth30
-
Bore Diameter3/8 to 3/4 in
-
Overall Length3/4 in
- Large bores are possible and the application should be carefully reviewed
- Listed maximum bore allows for standard keyway and setscrew
-
UNSPSC31171707
Recently Viewed
Steel spur gears in 20 to 2 Diametral Pitch - 14.5 deg pressure angle stocked. Other circular, metric or D. P. sizes made-to-order in 14.5 deg, 20 deg or other pressure angles from steel, nylon, phenolic, bronze, cast iron or other materials up to 96 in Dia Internal gears and ground external profiles may be provided subject to equipment limitations.
The McGill® CAMROL® full complement needle bearings feature black oxide treated bearing steel. They are available in two basic mounting styles for use in mechanical automation or linear motion applications. Our basic features each contribute to superior performance. The LUBRIDISC® seal option helps prevent metal to metal contact within the bearing. It also provides a barrier for containment entry and blowout protection when relubricating. These bearings are available with several dimensional choices. The seal options and combinations provide a specific solution for each application. Within the following section you can learn more about these features and how they can be applied to your application.
TAPERED ROLLER BEARING CONE-NTNM84548 >
Link-Belt® 10438202 200 Standard-Duty Pillow Block Ball Bearing, 3-7/16 in Dia Bore, 10 in L Bolt Center-to-Center, 3-3/4 in Base to Bore Centerline, 13 in OAL x 7-7/16 in OAH
200 series standard duty ball bearing units provide a versatility of application arrangements for carrying shafts with radial or combination radial and thrust loads. They are designed for general purpose industrial machinery, conveyors, chain, belt drives, fans, blowers, power transmission and many other applications.
1/2" SOCKET WELD BLACK 45-D ELBOW-FIT1/2XHSWB45 >
4.625" X 6.001" X 1.063" NITRILE RUBBER WHEEL END COMPONENT
