TDT-7-3-15/16 Dodge® 272136 Twin-Tapered Bushing Assembly, 3-15/16 in ID, Ductile Iron
Dodge® 272136 Twin-Tapered Bushing Assembly, 3-15/16 in ID, Ductile Iron
-
BrandDodge®
-
UPC782475146109
-
Manufacturer Part Number272136
-
CountryUSA
-
MaterialDuctile Iron
-
TypeTwin-Tapered
-
Inside Diameter3-15/16 in
-
Suitable For Use WithTorque-Arm® TXT7 Speed Reducer
- Full length shaft key
- Flanged bushing mount
- Removal screws
- Fully split bushings
- Clamp fit
- Reliably supports both sides of reducer
- Maximum torque and shock load capability
- Fast and simple installation
- Reliable demount of reducer
- Eliminates fretting and seizing problems
- Strong, shock resistant bushings
- Eliminates driven shaft damage
- Reduces wobble and fits undersized shafts
- Without setscrews
-
Alternative Part NumberTDT7 X 3 15/16
-
UNSPSC31171600
-
Package Description1/PK
-
Standards/ApprovalsAGMA|AFBMA|ASAMMA|BSA|CMA|MPTA|PTDA Standards|UL Listed
-
Catalog
-
Specification Sheet
Recently Viewed
TDT-7-3-15/16 Dodge® 272136 Twin-Tapered Bushing Assembly, 3-15/16 in ID, Ductile Iron
Dodge® 272136 Twin-Tapered Bushing Assembly, 3-15/16 in ID, Ductile Iron
RIDGID® 34142 Inner Outer Cleaning Brush, 1-1/4 in L, 7-3/4 in OAL
Crown® by Aervoe® 7007Q Cold Galvanizing Compound, 1 qt Container, Bulk Liquid Form, Light Gray, 48 sq-ft/can Coverage, 24 hr Curing
Crown's premium Cold Galvanize Coating 93% zinc Rich provides corrosion protection to ferrous metal surfaces; first as a long lived coating of practically pure zinc comparable to that obtained by galvanization and second, through sacrificial anodization. Both aerosol and bulk use metallic zinc dust that is 97% pure, which leaves 93% zinc in the dry film. The zinc fuses to metal substrates for protection equal to or better than hot-dipped galvanizing. This protection becomes effective when the surface is scratched, broken, or corrupted. With the presence of moisture the zinc coating will corrode while continuing to protect the metal it covers.
Dixon® GC200 Standard Dry Gauge, 0 to 15 psi, 1/4 in Connection, 2 in Dial, +/- 3-2-3 %
Dixon® GC200 Standard Dry Gauge, 0 to 15 psi, 1/4 in Connection, 2 in Dial, +/- 3-2-3 %
1/2" X 1/2" COARSE GRIT SANDING SLEEVE-FOR60220>
1/2" X 1/2" MEDIUM GRIT SANDING SLEEVE-FOR60219>
