Browning® 1224385 Minimum Plain Bore Type C1 Change Gear Without Hardened Teeth, 1-1/4 in Dia Bore
Browning® is one of the most comprehensive lines of off-the shelf gears in the industry, including spur, miter and bevel and change gears. These are available in 20 deg pressure angle from 20 to 4 dp and 14-1/2 deg pressure angle from 48 to 3 dp all designed to increase output, reduce costs and avoid specials.
-
BrandBrowning®
-
UPC662289130931
-
Manufacturer Part Number1224385
-
CountryUSA
-
Face Width1 in
-
Pitch Diameter3 in
-
MaterialSteel
-
Pressure Angle14.5 deg
-
TypeMinimum Plain Bore Type C1
-
Diametral Pitch10
-
Number of Teeth30
-
Outside Diameter3.2 in
-
Bore Diameter1-1/4 in
-
Overall Length1 in
- Thousands of shaft-ready finished bore and bushing types eliminate rework costs, assure true-running precision at all times
- More stock sizes made of steel and weldability plus greater strength, at cast iron prices
- Extra tooth depth and larger radii provide stronger teeth, a deeper lubrication reservoir and more clearance
- Many odd tooth sizes
- Custom gear capabilities up to 60 in Dia and 17 in face
-
Alternative Part NumberNCG1030
-
UNSPSC31171700
-
Standards/ApprovalsAGMA Standard
-
Catalog
Recently Viewed
Browning® 1224385 Minimum Plain Bore Type C1 Change Gear Without Hardened Teeth, 1-1/4 in Dia Bore
Browning® is one of the most comprehensive lines of off-the shelf gears in the industry, including spur, miter and bevel and change gears. These are available in 20 deg pressure angle from 20 to 4 dp and 14-1/2 deg pressure angle from 48 to 3 dp all designed to increase output, reduce costs and avoid specials.
Gates® Power Transmission Micro-V® 300J24 Heavy Duty V-Belt, J Section, 3/32 in W Top, 30 in L Outside, 5/32 in THK, Polychloroprene Rubber
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
Gardner Bender 20-163P Fully Insulated Bullet Disconnect, 16 to 14 AWG, 0.156 in Dia Bullet, Blue
The Gardner Bender quick and always reliable crimp-type wire terminals feature color-coded barrels denoting industry standard wire gauge sizes. Available in ring, spade, disconnect and bullet styles. Vinyl insulated barrels provide a high degree of protection and carry a maximum 600 V rating. Temperature ratings for the complete line are 75 deg C (167 deg F). You will find various terminals for various circuit protection devices, all insulated to last for those any environments. Gardner Bender terminals are leading the industry in quality and durability.
Browning® 767891 VPLS 200 Normal Duty Low Base Pillow Block Ball Bearing Unit, 1-1/4 in Dia Bore, 4-5/32 to 5-3/32 in L Bolt Center-to-Center, 1-9/16 in Base to Bore Centerline, 6-3/16 in OAL x 3-5/32 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
18" SHELVES-HLW51383618>
Crescent® 1290G Sheer Cut Strapping Cutter, 0.05 in Cutting, 12 in OAL, 0.05 in THK Strap
The 12 inch Steel Strap Cutter cuts heavy steel strapping, especially for use loading and unloading pallets from freight, cars, trucks, and ships.
