TXT205T Dodge® Torque-Arm™ II 902003 Heavy Duty Single and Double Reduction Speed Reducer, Solid Shaft Input, Tapered Hollow Bore Output, 10 hp, 9:1 Gear
With 60 years of proven dependability and more than 1.8 million units in service throughout the world, Dodge® Torque-Arm™ speed reducers are the standard of the industry and the benchmark to which others are compared. The Torque-Arm™ II is a shaft mount helical gear reducer that mounts directly to the driven shaft with a number of accessories available to produce versatility, cost savings and long life. A long list of standard features makes this reducer suitable for a wide range of environments right off the shelf.
-
BrandDodge®
-
UPC782475542055
-
Manufacturer Part Number902003
-
CountryUSA
-
Lubrication TypeOil
-
FinishGray
-
MaterialCast Iron
-
Gear Ratio9:1
-
TypeHeavy Duty Single and Double Reduction
-
Mounting TypeShaft
-
Horsepower10 hp
-
Input Maximum Speed1821 rpm
-
Input Size1.125 in Dia x 3.94 in L
-
Input TypeSolid Shaft
-
Dimensions12.61 in L x 7.81 in W x 15.08 in H
-
Output Size2-3/16 in
-
Output TypeTapered Hollow Bore
- Unparalleled torque ratings
- Industry leading backstop design
- Patented sealing system
- Modular steel motor mount system
- Patented twin tapered bushing system
- Advanced sealing system
- 1821 rpm input/200 rpm output
- Case size: 2
- Size: TA2115H
-
Alternative Part NumberTA2115H09
-
UNSPSC26111536
-
Package DescriptionEACH
-
Standards/ApprovalsABMA|AGMA|ATEX|BSA|CEMA|EASA|MHI|MPTA|NEMA|NSSSGA|PTDA|RoHS Compliant|SME|SWE|TUV Certified
-
WarrantyLimited
-
Specification Sheet
-
Catalog
-
Instruction/Installation Manual
-
Warranty Information
Recently Viewed
TXT205T Dodge® Torque-Arm™ II 902003 Heavy Duty Single and Double Reduction Speed Reducer, Solid Shaft Input, Tapered Hollow Bore Output, 10 hp, 9:1 Gear
With 60 years of proven dependability and more than 1.8 million units in service throughout the world, Dodge® Torque-Arm™ speed reducers are the standard of the industry and the benchmark to which others are compared. The Torque-Arm™ II is a shaft mount helical gear reducer that mounts directly to the driven shaft with a number of accessories available to produce versatility, cost savings and long life. A long list of standard features makes this reducer suitable for a wide range of environments right off the shelf.
FYH® NANFL204 12 NANFL Standard Duty Flange Mount Ball Bearing Unit, 3/4 in Dia Bore, 3-17/32 in L Bolt Center-to-Center, 25/64 in Dia Bolt Circle, 2-Bolt Flange Flange Mount
FYH® NANFL204 12 NANFL Standard Duty Flange Mount Ball Bearing Unit, 3/4 in Dia Bore, 3-17/32 in L Bolt Center-to-Center, 25/64 in Dia Bolt Circle, 2-Bolt Flange Flange Mount
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
NATIONAL PIPE THREAD SWIVEL HYDRAULIC ADAPTER-FTG421212 >
Speakman® SE-400 Select Large Rectangular Eye/Face Wash Bowl, Wall Mount, Push Handle Operation, ANSI/ISEA Z358.1
The Speakman® select series SE-400 eye and face wash stainless steel bowl wall mount system features a full flood eye face wash configuration which has six aerated sprays for gentle yet thorough rinsing of the eyes and face in case of exposure to injurious materials. The soft aerated sprays allow users to comfortably flush their eyes for the ANSI recommended 15 minutes. A stainless steel push-handle activates these units. The SE-400 is a wall mounted unit with a stainless steel bowl and comes complete with a wall mount bracket. The SE-400 is compliant to the ANSI/ISEA Z358.1 standard.
Dodge® 123173 206 Normal Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 1-1/4 in Dia Bore, 3-1/4 in L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 4-1/4 in OAL/Dia
Dodge® 123173 206 Normal Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 1-1/4 in Dia Bore, 3-1/4 in L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 4-1/4 in OAL/Dia
