154-Q-56-H-5 5:1 Worm
5:1 WORM GEAR REDUCER-BRW154Q56H5 >
Recently Viewed
5:1 WORM GEAR REDUCER-BRW154Q56H5 >
WORM GEAR REDUCER-BRW100Q56LR40 >
Anvil® 0310000401 FIG 1101 Standard 90 deg Pipe Elbow, 1/4 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Greenlee® ESM™ DM-210A Digital Multimeter, 60 mV to 1000 V AC/DC, 600 mA to 10 A, 600 Ohm to 60 MOhm, 600 nF to 300 uF Measuring, 600 Ohm, 6/60/600 kOhm, 6/60 MOhm, Backlit LCD Display
200A series was designed to provide all of the critical day to day features of handheld multimeters in a smaller, ergonomic design. Look to this series for CAT IV 300 VAC, CAT III 600 VAC and CAT II 1000 VAC applications. Backed by Greenlee® lifetime limited warranty, the 200A series multimeters offer the professional electrician superior value when compared to the competition.
Schneider Electric's Square D general duty safety switches are designed for residential and light commercial applications where durability and economy are prime considerations. Typical loads include lighting, air conditioning, and appliances. General duty safety switches feature a quick make, quick break operating mechanism. This single throw safety switch is a non fusible disconnect and has a rated current of 60A for 240VAC. This general duty switch has a 3 wire configuration with 3 poles. The enclosure is surface mounted and is a Type 1. General duty safety switches are UL Listed, and meet or exceed the NEMA Standard KS1.
Dixon® MT2010 T Series Mechanical Tee, 2 in Nominal, Grooved End Style, Ductile Iron
Dixon® MT2010 T Series Mechanical Tee, 2 in Nominal, Grooved End Style, Ductile Iron
