Dichtomatik N70324 O-Ring, 324 Dash Number, 1.35 in ID x 1.77 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
-
BrandDichtomatik
-
Manufacturer Part NumberN70324
-
CountryUSA
-
Temperature Rating40 to 120 deg F
-
MaterialNitrile Rubber
-
ColorBlack
-
Inside Diameter1.35 in
-
Domestic/ImportImport
-
Durometer70 Shore A
-
Outside Diameter1.77 in
- Good chemical resistance to mineral oils and greases
- The physical and chemical resistance properties of NBR materials are determined by the acrylonitrile (ACN) content of the base polymer which can vary between 18 and 50%
- Low ACN content ensures good flexibility at low temperatures, but offers limited resistance to oils and fuels
- As the ACN content increases, the low temperature flexibility reduces and the resistance to oils and fuels improves
- Physical and chemical resistance properties of NBR materials are also affected by the cure system of the polymer
- Peroxide cured materials have improved physical properties, chemical resistance and thermal properties as compared to sulfur-donor-cured materials
- Standard grades of NBR are typically resistant to mineral oil-based lubricants and greases, many grades of hydraulic fluids, aliphatic hydrocarbons, silicone oils and greases and water to about 80 deg C
- NBR is generally not resistant to aromatic and chlorinated hydrocarbons, fuels with a high aromatic content, polar solvents, glycol based brake fluids and non-flammable hydraulic fluids (HFD)
- NBR also has low resistance to ozone, weathering and aging, but in many applications this has no negative effect
-
UNSPSC31401503
-
Standards/ApprovalsDNV Approved|FDA Compliant|ISD Certified|NFPA Listed|PTDA Certified
Recently Viewed
Dichtomatik N70324 O-Ring, 324 Dash Number, 1.35 in ID x 1.77 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
GENERAL® 21 Sheet Metal Gage, 0 to 36 AWG Measuring, 3-1/4 in Dia
GENERAL® 21 Sheet Metal Gage, 0 to 36 AWG Measuring, 3-1/4 in Dia
Square D™ QO™ QOB290 Standard Miniature Circuit Breaker, 120/240 V AC, 90 A, 10 kA Interrupt, 2 Poles, Thermal Magnetic Trip
QO and QOB one, two and three pole thermal magnetic circuit breakers provide overcurrent protection and switching on ac and dc systems. These circuit breakers have an over center, trip free toggle mechanism with quick make, quick break action and positive handle indication. They also have VisiTrip trip indication, which provides a visual indication that the circuit breaker has tripped and interrupted the circuit. A full line of features and factory installed accessories are also available such as shunt trips, auxiliary switches and alarm switches. This 2 pole QO circuit breaker is rated at 90A at 120/240VAC. This unit provides 10kA breaking capacity and bolt on mounting. QO circuit breakers are UL Listed under UL File E84967 and are CSA Certified under CSA Master Contract 153555.
Dodge® 023004 111 Type E-Xtra Pillow Block Roller Bearing Unit, 1-1/2 in Dia Bore, 6.13 to 6.38 in L Bolt Center-to-Center, 2.13 in Base to Bore Centerline, 7.88 in OAL x 4-1/4 in OAH
Dodge® 023004 111 Type E-Xtra Pillow Block Roller Bearing Unit, 1-1/2 in Dia Bore, 6.13 to 6.38 in L Bolt Center-to-Center, 2.13 in Base to Bore Centerline, 7.88 in OAL x 4-1/4 in OAH
Coilhose® RK092 Nylon Coil Repair Kit, Brass, Domestic
Pyramex® SSG1810S Safety Eyewear, Anti-Scratch, Clear Lens, Wrap Around Frame, Slate Gray, Nylon 6.6 Frame, Polycarbonate Lens, ANSI P Z87.1, CAN/CSA Z94.3-15, CE EN166, MIL-PRF 32432
