Dichtomatik 75115266 O-Ring, 255 Dash Number, 5.609 in ID x 5.887 in OD, PTFE, 55 Durometer, Import
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
-
BrandDichtomatik
-
Manufacturer Part Number75115266
-
CountryUSA
-
Temperature Rating40 to 120 deg F
-
MaterialPTFE
-
ColorWhite
-
Inside Diameter5.609 in
-
Domestic/ImportImport
-
Durometer55
-
Outside Diameter5.887 in
- Good chemical resistance to aggressive acids, bases, alcohols and oils
-
UNSPSC31401503
-
Standards/ApprovalsDNV Approved|ISD Certified|NFPA Listed|PTDA Certified
-
Alternative Part NumberTEF255
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Dichtomatik 75115266 O-Ring, 255 Dash Number, 5.609 in ID x 5.887 in OD, PTFE, 55 Durometer, Import
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
MORSE® 22200 1655 Chucking Reamer, 0.3135 in Dia x 6 in OAL, 0.2792 in Dia Straight Shank, Straight Flute
MORSE® 22200 1655 Chucking Reamer, 0.3135 in Dia x 6 in OAL, 0.2792 in Dia Straight Shank, Straight Flute
MORSE® 29929 1655H Chucking Reamer, 1.002 in Dia x 10-1/2 in OAL, 0.874 in Dia Straight Shank, Straight Flute
MORSE® 29929 1655H Chucking Reamer, 1.002 in Dia x 10-1/2 in OAL, 0.874 in Dia Straight Shank, Straight Flute
13-TOOTH #60-1 CHAIN SPROCKETS IDC 60-B-13-F-1-3/8
13 TOOTH SPROCKETS FOR #60 CHAIN
2" CPVC SCH-80 PLASTIC PIPE (FT)-NIBCPVCC80200 >
Linzer® 85051-2 8505 Closed Cell Paint Brush, 1 in W Foam Brush, Wood Handle
