Dichtomatik N70236 O-Ring, 236 Dash Number, 3.234 in ID x 3.512 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
-
BrandDichtomatik
-
Manufacturer Part NumberN70236
-
CountryUSA
-
Temperature Rating40 to 120 deg F
-
MaterialNitrile Rubber
-
ColorBlack
-
Inside Diameter3.234 in
-
Domestic/ImportImport
-
Durometer70 Shore A
-
Outside Diameter3.512 in
- Good chemical resistance to mineral oils and greases
- The physical and chemical resistance properties of NBR materials are determined by the acrylonitrile (ACN) content of the base polymer which can vary between 18 and 50%
- Low ACN content ensures good flexibility at low temperatures, but offers limited resistance to oils and fuels
- As the ACN content increases, the low temperature flexibility reduces and the resistance to oils and fuels improves
- Physical and chemical resistance properties of NBR materials are also affected by the cure system of the polymer
- Peroxide cured materials have improved physical properties, chemical resistance and thermal properties as compared to sulfur-donor-cured materials
- Standard grades of NBR are typically resistant to mineral oil-based lubricants and greases, many grades of hydraulic fluids, aliphatic hydrocarbons, silicone oils and greases and water to about 80 deg C
- NBR is generally not resistant to aromatic and chlorinated hydrocarbons, fuels with a high aromatic content, polar solvents, glycol based brake fluids and non-flammable hydraulic fluids (HFD)
- NBR also has low resistance to ozone, weathering and aging, but in many applications this has no negative effect
-
UNSPSC31401503
-
Standards/ApprovalsDNV Approved|FDA Compliant|ISD Certified|NFPA Listed|PTDA Certified
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Dichtomatik N70236 O-Ring, 236 Dash Number, 3.234 in ID x 3.512 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Master Lock® 420 Scissor Snap-On Lockout Hasp, 6 Padlocks, 9/32 in Max Dia Padlock Shackle, Steel
Steel Lockout Hasp - 1 in (2.5cm) jaw. Lockout by multiple workers at each lockout point. Keeps equipment inoperative while repairs or adjustments are made. Control cannot be turned on until last worker's padlock is removed from hasp. Heavy gauge steel jaw with red vinyl coated handle. Dimensions are 1-3/4 in x 4-1/2 in (4.4cm x 11.4cm) with 1 in (2.5cm) inside jaw Dia, holds up to 6 padlocks. Shelf pack quantity 12, master carton quantity 72. commercial packaging.
BBI 455265 Partially Threaded Cap Screw, 1-14, 9-1/2 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
BBI 455265 Partially Threaded Cap Screw, 1-14, 9-1/2 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
BBI 451109 Partially Threaded Cap Screw, 1/2-13, 13 in L Under Head, 8 Grade, Alloy Steel, Plain
BBI 451109 Partially Threaded Cap Screw, 1/2-13, 13 in L Under Head, 8 Grade, Alloy Steel, Plain
Dichtomatik N70224 O-Ring, 224 Dash Number, 1.734 in ID x 2.012 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
BBI 455412 Partially Threaded Cap Screw, 9/16-18, 3 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
BBI 455412 Partially Threaded Cap Screw, 9/16-18, 3 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
