Dichtomatik N70121 O-Ring, 121 Dash Number, 1.049 in ID x 1.255 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
-
BrandDichtomatik
-
Manufacturer Part NumberN70121
-
CountryUSA
-
Temperature Rating40 to 120 deg F
-
MaterialNitrile Rubber
-
ColorBlack
-
Inside Diameter1.049 in
-
Domestic/ImportImport
-
Durometer70 Shore A
-
Outside Diameter1.255 in
- Good chemical resistance to mineral oils and greases
- The physical and chemical resistance properties of NBR materials are determined by the acrylonitrile (ACN) content of the base polymer which can vary between 18 and 50%
- Low ACN content ensures good flexibility at low temperatures, but offers limited resistance to oils and fuels
- As the ACN content increases, the low temperature flexibility reduces and the resistance to oils and fuels improves
- Physical and chemical resistance properties of NBR materials are also affected by the cure system of the polymer
- Peroxide cured materials have improved physical properties, chemical resistance and thermal properties as compared to sulfur-donor-cured materials
- Standard grades of NBR are typically resistant to mineral oil-based lubricants and greases, many grades of hydraulic fluids, aliphatic hydrocarbons, silicone oils and greases and water to about 80 deg C
- NBR is generally not resistant to aromatic and chlorinated hydrocarbons, fuels with a high aromatic content, polar solvents, glycol based brake fluids and non-flammable hydraulic fluids (HFD)
- NBR also has low resistance to ozone, weathering and aging, but in many applications this has no negative effect
-
UNSPSC31401503
-
Standards/ApprovalsDNV Approved|FDA Compliant|ISD Certified|NFPA Listed|PTDA Certified
Recently Viewed
Dichtomatik N70121 O-Ring, 121 Dash Number, 1.049 in ID x 1.255 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
40-B-10-F-1/2 10 Tooth Sprockets For #40
10 TOOTH SPROCKETS FOR #40 CHAIN-IDC40B10F1/2 >
Enerpac® RC2510 General Purpose Single Acting Spring Return Solid Plunger Hydraulic Cylinder, 25.8 ton Capacity, 2.56 in Bore, 10-1/4 in L Stroke, 14-3/4 in Retract, 2 in Dia Rod, 10000 psi Pressure
Enerpac® RC2510 General Purpose Single Acting Spring Return Solid Plunger Hydraulic Cylinder, 25.8 ton Capacity, 2.56 in Bore, 10-1/4 in L Stroke, 14-3/4 in Retract, 2 in Dia Rod, 10000 psi Pressure
TCM112042VB>
BBI 847226 Partially Threaded Cap Screw, 7/16-14, 2 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
BBI 847226 Partially Threaded Cap Screw, 7/16-14, 2 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
MCR Safety CP14L MCR Guard CP14 Industrial Grade Chemical-Resistant Gloves, L, Paired Hand, Black, Unlined Lining, 14 in L, Resists: Acid, Aldehydes, Alcohol, Amides, Bases, Esters and Ketones, Unsupported Support, Gauntlet Cuff, 14 mil THK
14 Inch Butyl Rubber Glove 14 mil Smooth Finish Gauntlet Rolled Cuff ESD Performance Surface Resistance 1.64 × 106 O Volume Resistance 1.15 × 105 O In-Use Resistance 6.93 × 104 O Latex Free Excellent Glove Protection against Skydrol for Aviation Maintenance and Mechanics MCR Guard has been battle-tested in conflicts worldwide and offers excellent permeation resistance to most acids, aldehydes, alcohols, amides, bases, esters, and ketones. These gloves are produced domestically with a unique solution dipped process. No other process can achieve such a tight molecular structure, the key to chemical impermeability. These chemical-resistant butyl gloves are made with the finest Butyl rubber for outstanding protection. The CP14 is a 14-mil smooth finish glove with a rolled cuff and is 14 inches long for added protection. MCR Safety's Butyl glove options are anti-static. If you are looking for the best butyl rubber gloves, look no further than MCR Safety! Click here to see all butyl rubber glove options.
