Dichtomatik N70105 O-Ring, 105 Dash Number, 0.143 in ID x 0.349 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
-
BrandDichtomatik
-
Manufacturer Part NumberN70105
-
CountryUSA
-
Temperature Rating40 to 120 deg F
-
MaterialNitrile Rubber
-
ColorBlack
-
Inside Diameter0.143 in
-
Domestic/ImportImport
-
Durometer70 Shore A
-
Outside Diameter0.349 in
- Good chemical resistance to mineral oils and greases
- The physical and chemical resistance properties of NBR materials are determined by the acrylonitrile (ACN) content of the base polymer which can vary between 18 and 50%
- Low ACN content ensures good flexibility at low temperatures, but offers limited resistance to oils and fuels
- As the ACN content increases, the low temperature flexibility reduces and the resistance to oils and fuels improves
- Physical and chemical resistance properties of NBR materials are also affected by the cure system of the polymer
- Peroxide cured materials have improved physical properties, chemical resistance and thermal properties as compared to sulfur-donor-cured materials
- Standard grades of NBR are typically resistant to mineral oil-based lubricants and greases, many grades of hydraulic fluids, aliphatic hydrocarbons, silicone oils and greases and water to about 80 deg C
- NBR is generally not resistant to aromatic and chlorinated hydrocarbons, fuels with a high aromatic content, polar solvents, glycol based brake fluids and non-flammable hydraulic fluids (HFD)
- NBR also has low resistance to ozone, weathering and aging, but in many applications this has no negative effect
-
UNSPSC31401503
-
Standards/ApprovalsDNV Approved|FDA Compliant|ISD Certified|NFPA Listed|PTDA Certified
Recently Viewed
Dichtomatik N70105 O-Ring, 105 Dash Number, 0.143 in ID x 0.349 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Gardner Bender WireGardâ„¢ TK-100 Slide Card Kit, 80 Pieces, For Use With Terminals and Connectors
Gardner Bender WireGardâ„¢ TK-100 Slide Card Kit, 80 Pieces, For Use With Terminals and Connectors
Resettable Combination Lock. 5/16 in (8 mm) Dia, 1 in (25 mm) high, 1 in (25 mm) wide shackle. 2 in (51 mm) wide solid body padlock. Hardened steel shackle for extra cut resistance. Reset tool included. 4-digit dialing allows for thousands of possible combinations. Retail carded packaging, shelf pack quantity 4, master carton quantity 24.
1/2" X 16-GA SQUARE TUBING-JMS1/2SQX16GAX24 >
Tapered roller bearing are designed such that cup, cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis. Along with metric series bearing, inch series bearing are also available. This type of bearing is suitable for applications that involve heavy or impact loading.
1/2" X 3" BLUE MD RECT DIE SPRINGS-LANSMDR500300 >
