Dichtomatik 75102005 O-Ring, 010 Dash Number, 0.239 in ID x 0.379 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
-
BrandDichtomatik
-
Manufacturer Part Number75102005
-
CountryUSA
-
Temperature Rating40 to 120 deg F
-
MaterialFKM
-
ColorBlack
-
Inside Diameter0.239 in
-
Domestic/ImportImport
-
Durometer75 Shore A
-
Outside Diameter0.379 in
- Good chemical resistance to mineral oils and greases, synthetic oils and greases, motor, transmission and ATF oils up to 150 deg C
- Very good weathering, ozone and aging resistance
- Very low gas permeability
-
UNSPSC31401503
-
Standards/ApprovalsASTM D1418|AS 568B|BS 1806|JIS 2401
-
Alternative Part NumberV75010
Recently Viewed
Dichtomatik 75102005 O-Ring, 010 Dash Number, 0.239 in ID x 0.379 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Series 4000, 5000 and 5005 reels are all steel construction and compact for a wide range of applications with critical space requirements. A full flow shaft and swivel assures maximum product delivery. Guide arm adjusts to two positions.
United Abrasives-SAIT 28000 General Purpose Bench Grinding Wheel, 6 in Dia x 3/4 in THK, 1 in Center Hole, 36 Grit, Aluminum Oxide Abrasive
1-QT LATEX WHITE BASE PAINT-BLP140510QT >
United Abrasives-SAIT 28062 General Purpose Bench Grinding Wheel, 12 in Dia x 2 in THK, 1-1/2 in Center Hole, 60 Grit, Aluminum Oxide Abrasive
Dixon® GC205 Vacuum Gauge, 0 to 30 in Hg, 1/4 in NPT Center Back Mount, Graduations: 0.5 in Hg/psi, +/-3-2-3%
Dixon® GC205 Vacuum Gauge, 0 to 30 in Hg, 1/4 in NPT Center Back Mount, Graduations: 0.5 in Hg/psi, +/-3-2-3%
