Dichtomatik 67191875 O-Ring, 54 mm ID x 60 mm OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
-
BrandDichtomatik
-
Manufacturer Part Number67191875
-
CountryUSA
-
Temperature Rating40 to 120 deg F
-
MaterialNitrile Rubber
-
ColorBlack
-
Inside Diameter54 mm
-
Domestic/ImportImport
-
Durometer70 Shore A
-
Outside Diameter60 mm
- Good chemical resistance to mineral oils and greases
-
UNSPSC31401503
-
Standards/ApprovalsDNV Approved|FDA Compliant|ISD Certified|NFPA Listed|PTDA Certified
-
Alternative Part NumberN3.00X054
-
Specification Sheet
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Dichtomatik 67191875 O-Ring, 54 mm ID x 60 mm OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Leviton® 84025 Standard Size Blank Wall Plate, 2 Gangs, 4.56 in W x 4.5 in H, 430 Stainless Steel
Leviton® 84025 Standard Size Blank Wall Plate, 2 Gangs, 4.56 in W x 4.5 in H, 430 Stainless Steel
IKO YB98/MF3 Inch Series Shell Grease Retained Uncaged Needle Roller Bearing, 9/16 in Dia Bore, 3/4 in OD, 1/2 in W
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
TDT-4-1-15/16 Dodge® 244093, 1 15/16 TDT4 Twin-Tapered Bushing Assembly, 1-15/16 in ID, Ductile Iron
Dodge® 244093, 1 15/16 TDT4 Twin-Tapered Bushing Assembly, 1-15/16 in ID, Ductile Iron
Klein Tools Crimping and Cutting Tool is designed for crimping non-insulated solderless terminals and connectors. Wire cutter in nose specially hardened for durability. Tapered nose allows you to work in confined spaces.
2-TON 20'-LIFT ELECTRIC CHAIN HOIST
