Dichtomatik 67004221 O-Ring, 28 mm ID x 34 mm OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
-
BrandDichtomatik
-
Manufacturer Part Number67004221
-
CountryUSA
-
Temperature Rating40 to 120 deg F
-
MaterialNitrile Rubber
-
ColorBlack
-
Inside Diameter28 mm
-
Domestic/ImportImport
-
Durometer70 Shore A
-
Outside Diameter34 mm
- Good chemical resistance to mineral oils and greases
-
UNSPSC31401503
-
Standards/ApprovalsDNV Approved|FDA Compliant|ISD Certified|NFPA Listed|PTDA Certified
-
Alternative Part NumberN3.00X028
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Dichtomatik 67004221 O-Ring, 28 mm ID x 34 mm OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Sealmaster® 550098 RCI Mounted Tapered Roller Insert Only, 1.438 in Dia Bore, 2-7/8 in OD, 3 in W, 4760 lb Load
Sealmaster® 550098 RCI Mounted Tapered Roller Insert Only, 1.438 in Dia Bore, 2-7/8 in OD, 3 in W, 4760 lb Load
Dichtomatik N70458 O-Ring, 458 Dash Number, 14.475 in ID x 15.025 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
1/2" X 2" USS GR-5 Plow Bolts
15-WATT 8-V MINIATURE BULBS-BULEL38>
National Hardware® N151-589 V834 Standard Barrel Bolt, 3 in L x 1.53 in W, 0.32 in, Steel
National Hardware® N151-589 V834 Standard Barrel Bolt, 3 in L x 1.53 in W, 0.32 in, Steel
