Dixon® 125-G-BU Cam and Groove Gasket, 1-1/4 in Nominal, 1-3/8 in ID x 1-15/16 in OD x 1/4 in THK, Buna-N
Dixon® 125-G-BU Cam and Groove Gasket, 1-1/4 in Nominal, 1-3/8 in ID x 1-15/16 in OD x 1/4 in THK, Buna-N
-
BrandDixon®
-
Manufacturer Part Number125-G-BU
-
CountryUSA
-
Thickness1/4 in
-
MaterialBuna-N
-
ColorBlack
-
Nominal Size1-1/4 in
-
Inside Diameter1-3/8 in
-
Outside Diameter1-15/16 in
- White neoprene and white Buna-N gaskets all contain FDA approved materials
- Color code 1 blue stripe
- The torque (force) required to close the handles on a pair of cam and groove fittings will vary according to the gasket chosen
- Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
- Do not use in connection with drinking water
- Wash hands after handling
-
UNSPSC40141734
-
Package Description100/BX
-
WarrantyLimited
Recently Viewed
Dixon® 125-G-BU Cam and Groove Gasket, 1-1/4 in Nominal, 1-3/8 in ID x 1-15/16 in OD x 1/4 in THK, Buna-N
Dixon® 125-G-BU Cam and Groove Gasket, 1-1/4 in Nominal, 1-3/8 in ID x 1-15/16 in OD x 1/4 in THK, Buna-N
10-S6/10/230/DC 10-watt 230-v Dc Bayonet Base Bulb-bul10s6/10/230/dc
10-WATT 230-V DC BAYONET BASE BULB-BUL10S6/10/230/DC
Handy pocket gage is approximately the size of a thin pocket watch. Ideal for inspectors, purchasing agents and salespeople to check the size of materials up to 3/8" or 9mm thick. The gage fits naturally in the curve between the thumb and index finger. A slight pull on the serrated top plate raises the spindle. 0-.375" Range, 0-100 Dial, .001" Grad, Flat Contacts.
CONSOLIDATED BRG D-5 Ball Thrust Bearing, 3/4 in Dia Bore, 1-15/32 in Dia Outside, 1 Rows, 0.562 in W
CONS D-5 Ball Thrust Bearing, 3/4 in Dia Bore, 1-15/32 in Dia Outside, 1 Rows, 0.562 in W
Browning® 1224435 Minimum Plain Bore Type C1 Change Gear, 10 Diametral Pitch, 14.5 deg Pressure Angle, 1 in W Face, 35 Teeth, 3-1/2 in Dia Pitch, 1-1/4 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
3" SCH-80 SOLVENT-WELD CPVC CAPS-NIB1847030 >
