Bussmann Super-Lag RES-30 Non-Current Limiting Non-Indicating Non-Time Delay Non-Rejection Renewable Fuse, 30 A, 600 V AC, 10 kAIC Interrupt, Class: H, Cylindrical Body
Non-current limiting, renewable 250V (REN) and 600V (RES) Class H size fuses and fuse links (250V LKN and 600V LKS) for use in electrical systems where the available fault current is less than 10,000 amps and frequent outages dictate the economy of these renewable type fuses.
-
BrandBussmann
-
UPC051712110303
-
Manufacturer Part NumberRES-30
-
CountryUSA
-
Terminal TypeFerrule End
-
MaterialMelamine
-
ClassH
-
TypeNon-Current Limiting Non-Indicating Non-Time Delay Non-Rejection
-
Mounting TypeHolder
-
Voltage Rating600 V AC
-
Amperage Rating30 A
-
SeriesRES
-
Interrupt Rating10 kAIC
-
Body Size0.81 in Dia x 5 in L
-
Body TypeCylindrical
-
ElementDual
- Designed without multiple links for easy fuse link replacement
- Fuses are generally sized at the amp rating of non-inductive circuits and 300% for motor circuits
- Time-lag
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 4XH82 |
-
Alternative Part Number7594472
-
UNSPSC39121605
-
IDEA Index ID7594472
-
Package DescriptionEACH
-
Standards/ApprovalsNot Applicable
-
Specification Sheet
Recently Viewed
Bussmann Super-Lag RES-30 Non-Current Limiting Non-Indicating Non-Time Delay Non-Rejection Renewable Fuse, 30 A, 600 V AC, 10 kAIC Interrupt, Class: H, Cylindrical Body
Non-current limiting, renewable 250V (REN) and 600V (RES) Class H size fuses and fuse links (250V LKN and 600V LKS) for use in electrical systems where the available fault current is less than 10,000 amps and frequent outages dictate the economy of these renewable type fuses.
ALTO SHATTER SHIELD BULBS#6880-BULF96T12CWHOALTOS >
ISOSTATIC™ Century® 104226 Round Bore Sleeve Bearing, 3/4 in Dia Bore, 1 in OD, 1/2 in W
MARXMAN™ 85066 330QI General Purpose Jobber Length Drill Bit, #12 Drill - Wire, 0.189 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
