Midget Fuses
Edison EBS5 Fast Acting Midget Fuse, 5 A, 600 VAC, 10 kA Interrupt
Edison EBS6 Fast Acting Midget Fuse, 6 A, 250 VAC, 10 kA Interrupt
Edison MCL1 Fast Acting Midget Fuse, 1 A, 600 VAC, 100 kA Interrupt
Edison MCL5 Fast Acting Midget Fuse, 5 A, 600 VAC, 100 kA Interrupt
Edison MCL6 Fast Acting Midget Fuse, 6 A, 600 VAC, 100 kA Interrupt
Edison MEN1.4 Time Delay Midget Fuse, 1.4 A, 250 VAC, 10 kA Interrupt
Edison MEN1.5 Time Delay Midget Fuse, 1.5 A, 250 VAC, 10 kA Interrupt
Edison MEN1.8 Time Delay Midget Fuse, 1.8 A, 250 VAC, 10 kA Interrupt
Edison MEN10 Midget Fuse, 10 A, 250 V, 10 kA, Time Delay
Edison MEN15 Midget Fuse, 15 A, 250 V, 10 kA, Time Delay
Edison MEN20 Midget Fuse, 20 A, 250 V, 10 kA, Time Delay
Edison MEN3 Midget Fuse, 3 A, 250 V, 10 kA, Time Delay
Edison MEN5 Midget Fuse, 5 A, 250 V, 10 kA, Time Delay
Edison MEN7 Time Delay Midget Fuse, 7 A, 250 VAC, 10 kA Interrupt
Edison MEQ1.25 Time Delay Midget Fuse, 1.25 A, 500 VAC, 10 kA Interrupt
Edison MEQ1.5 Time Delay Midget Fuse, 1.5 A, 500 VAC, 10 kA Interrupt
Edison MEQ1.6 Time Delay Midget Fuse, 1.6 A, 500 VAC, 10 kA Interrupt
Edison MEQ15 Midget Fuse, 15 A, 500 V, 10 kA, Time Delay
Edison MEQ2 Midget Fuse, 2 A, 500 V, 10 kA, Time Delay
Edison MEQ20 Midget Fuse, 20 A, 500 V, 10 kA, Time Delay
Edison MEQ3.2 Time Delay Midget Fuse, 3.2 A, 500 VAC, 10 kA Interrupt
Edison MEQ3.5 Time Delay Midget Fuse, 3.5 A, 500 VAC, 10 kA Interrupt
Edison MEQ30 Midget Fuse, 30 A, 500 V, 10 kA, Time Delay
Edison MEQ4 Midget Fuse, 4 A, 500 V, 10 kA, Time Delay
Recently Viewed
5 Piece, Spiral Screw Extractor Set, Designed For Softer Materials Or Thin Walled Pieces Such As Pipes & Fittings, Design Eases Extraction Because It Does Not Expand The Material As You Remove It, Removes Both Left Hand & Right Hand Threaded Parts, Includes Extractors #1 Through #5.
Proto® TorquePlus™ J7208M Standard Length Socket, Metric, 3/8 in Square Drive, 8 mm
POWER COLLET FOR DEWALT 625 ROUTER-JAC33841>
3" X 8" TIE-ROD HYD/CYLINDERS>
4-1/2"X7/8"60G TYPE27 POLIFAN DISC
Milwaukee® 48-20-5050 Heavy Duty Thin Wall Core Bit, 3-1/2 in Drill - Fraction, 3.5 in Drill - Decimal Inch, Carbide
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in.. the inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) SDS Plus drive shank must be used to drive the core bit. Use 48-20-6155 center pin and 48-20-6160 guide plate for positioning and starting the hole. Thin wall core bits are available from 1 in. to 6 in. diameters. See thick wall core bits for cured concrete and/or larger hammers.
