Bussmann GDA-6.3A Small Dimension Fast Acting Fuse, 6.3 A, 250 V AC/32 V DC, 1500 A Interrupt, Cylindrical Body
Fast-acting, high breaking capacity 5 mm x 20 mm ferrule fuse designed to IEC 60127-2 for overcurrent protection of electronic circuits. Install into a Bussmann Series fuse holder, block or fuse clip. Also available axial leads for thru-hole installation. Eaton’s GSA fast-acting, high breaking capacity 5mm x 20mm ferrule fuses are designed to IEC 60127-2 for overcurrent protection of electronic circuits. Order in cartridge fuse format and install into a Bussmann Series fuse holder, block, or fuse clip, or purchase with available axial leads for thru-hole installation.
-
BrandBussmann
-
UPC051712431378
-
Manufacturer Part NumberGDA-6.3A
-
CountryUSA
-
Terminal TypeFerrule
-
MaterialCeramic
-
Frequency Rating50 Hz
-
Rejection/Non-RejectionNon-Rejection
-
Response Time60 min, 30 min, 10 ms, 3 s, 3 ms, 300 ms, 20 ms
-
TypeSmall Dimension
-
Mounting TypeClip/Holder
-
Voltage Rating250 V AC/32 V DC
-
Amperage Rating6.3 A
-
SeriesGDA
-
Indicating/Non-IndicatingNon-Indicating
-
Interrupt Rating1500 A
-
Body Size5.2 mm Dia x 20 mm H
-
Body TypeCylindrical
-
ElementSingle
- Fast acting for maximum protection
- High break capacity for use in higher fault energy electronic circuitry
- Nickel plated brass end caps
- 60 min minimum at 1.5 In, 30 min maximum at 2.1 In, 10 ms minimum and 3 s maximum at 2.75 In, 3 ms minimum and 300 ms maximum at 4 In, 20 ms maximum at 10 In response time
- 1500 A at 250 VAC interrupt rating
-
Alternative Part Number7614411
-
UNSPSC39121611
-
IDEA Index ID7614411
-
Package DescriptionEACH
-
Standards/ApprovalsVDE,CE Marked,CCC Marked
-
Catalog
-
Specification Sheet
Recently Viewed
Bussmann GDA-6.3A Small Dimension Fast Acting Fuse, 6.3 A, 250 V AC/32 V DC, 1500 A Interrupt, Cylindrical Body
Fast-acting, high breaking capacity 5 mm x 20 mm ferrule fuse designed to IEC 60127-2 for overcurrent protection of electronic circuits. Install into a Bussmann Series fuse holder, block or fuse clip. Also available axial leads for thru-hole installation. Eaton’s GSA fast-acting, high breaking capacity 5mm x 20mm ferrule fuses are designed to IEC 60127-2 for overcurrent protection of electronic circuits. Order in cartridge fuse format and install into a Bussmann Series fuse holder, block, or fuse clip, or purchase with available axial leads for thru-hole installation.
10" PLYWOOD CIR/SAW BLADES-JWH346398>
Inner Rings can be integrated with shell-type or various machined needle roller bearings to provide good roller support without worrying about premature shaft wear. We heat-treat and grind our Inner Rings to tight tolerances to create hard, tough raceways for applications where it is impossible to make shaft surfaces to a specific hardness or roughness attribute. They're an economical alternative to bushings because they don't require any additional machining. Wide Inner Rings are also available to accommodate shafts that move axially or seals that are adjacent to bearings. Inner Rings come in a broad range of shaft diameters and assembly elements include small chamfers or gentle taper relief options. Inner Rings for machined-type needle roller bearings come in a variety of dimensions. Inch-type LRB series Inner Rings offer shaft diameters from 3/8 to 3-3/4 in and oil-hole versions for easier lubrication.
Littelfuse® POWR-GARD® LLSRK150 Current Limiting Time Delay Fuse, 150 A, 600 V AC/300 V DC, 200/20 kA Interrupt, RK1 Class, Cartridge Body
Littelfuse® LLNRK and LLSRK series POWR-PRO® fuses provide superior overload and short circuit protection for service entrance, main, feeder and general purpose branch circuits upto 600 A. LLNRK/LLSRK series fuses can be installed in existing Class H fuse blocks to upgrade systems containing lower interrupting rating Class H one-time or renewable fuses.
Proto® J1209ST Screwdriver Set, 9 Pieces, ASME B107.15, Alloy Steel Shank, Polished Chrome/Black Oxide Tipped
MORSE® 25829 1772 Short Straight Shank Interchangeable Pilot Counterbore, 3/4 in Dia Bore, 1/2 in Dia Shank, 5-3/8 in OAL, 3 Flutes, HSS, Pilot Shank Diameter Compatibility: 1/4 in
