Fuses, Motor Protection
Littelfuse® POWR-GARD® 1304R1C5.5W Current Limiting Single Barrel Medium Voltage Fuse With Hook Eye, 130 A, 5.5 kV AC, 80 kA Interrupt, Class: R, Cartridge Body
R-rated fuses provide required short circuit protection for medium voltage motors, motor controllers and associated circuitry. These components have limited ability to absorb the energy of large short circuit currents. Medium voltage motor controllers contain overload relays which provide both overload protection and locked rotor protection to the motor. The controllers are also intended to interrupt low value short circuits within the capability of the motor controller. This protects the medium voltage fuse from sustained over currents which are less than their minimum interrupting rating. NEMA standards for R-rated medium voltage power fuses require that they operate within 15 to 35 s when subjected to an RMS current 100 times the R-rating.
Recently Viewed
1/2" X 12" 7/16" HEX WRENCH AUGER BITS-IRW48508>
5-MM X 16-MM FLAT HEAD SOCKET HEAD CAPSCREW-MET799105016 >
120-V SPST 24-HR DIAL TIME SWITCH - PP-CD101 >
7/32" MDGT 15&80 DEGREE MINATURE ANGLE WRENCH, FULL POLISH.
8-32" X 1/4" B/H S/H CAPSCREWS-HOL64016>
The Grey Pneumatic 1/2" Drive x 22mm Extra-Deep Socket (2022XMD) is a robust and versatile tool designed for demanding tasks. With its extra-deep length, 6-point impact design, and high-quality construction, this socket is perfect for reaching into tight spaces and handling heavy-duty applications efficiently.
KEY FEATURES AND BENEFITS:
Extra-Deep Length: Ideal for reaching deep into tight spaces.
6-Point Impact Socket: Built for heavy-duty use with impact tools.
High-Quality Chrome-Molybdenum Steel: Provides strength and durability.
Heat-Treated for Strength: Ensures long-lasting performance.
Hard-Stamped Size Markings: Easy identification.
SPECIFICATIONS:
Drive: 1/2"
Socket Size: 22mm
Overall Length: Approximately 5 inches
Bolt Clearance Depth: Over 4-3/8 inches
HOW TO USE:
Identify the Fastener: Make sure the socket size matches the fastener you're working on.
Attach the Socket: Securely attach the socket to your impact wrench or ratchet.
Position the Socket: Align the socket with the fastener.
Apply Torque: Use the tool to apply the necessary torque to tighten or loosen the fastener.
