Littelfuse® POWR-GARD® LFR60030-1CID Indicating Fuse Block, 600 V AC, 30 A, Class: R, 14 to 6 AWG Wire, 1 Pole
The Littelfuse® Class H/K5 and R blocks offer many benefits such as indication, snap-to-release DIN rail mounting and universal mounting holes. Class H and Class R fuse blocks are dimensionally the same, but Class R blocks incorporate a rejection feature, which only allows Class R fuses to be inserted.
-
BrandLittelfuse®
-
UPC079458181586
-
Manufacturer Part NumberLFR60030-1CID
-
CountryUSA
-
Temperature Rating130 deg C
-
MaterialThermoplastic
-
ClassR
-
Fuse Diameter0.563 in
-
Fuse Length2 in
-
TypeIndicating
-
Connection TypeBox Lug
-
Mounting TypeDIN Rail
-
Voltage Rating600 V AC
-
Amperage Rating30 A
-
SeriesLFR
-
Wire Size14 to 6 AWG
-
Number of Poles1
-
Dimensions6.56 in L x 1.51 in W x 2.07 in H
-
Suitable For Use WithFLSR/FLSR_ID, KLSR, LLSRK/LLSRK_ID and IDSR Series Fuse
- Universal mounting holes for easy replacement
- One hand release from DIN rail for ferrule style fuses
- Reinforced fuse clips are standard on all class H and class R fuse blocks
- <0.6 ma at 600 V leakage current
- 200 kA rms symmetrical withstand rating
- Clip designs maximize electrical contact and minimize heat rise
- DIN-Rail releasable for all non-knife blade style fuses
- UL94 V-0 flammability rating
- Lead (Pb) free
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 6LVP8 |
-
Alternative Part Number11022998
-
UNSPSC39121629
-
IDEA Index ID11022998
-
Package DescriptionEACH
-
Standards/ApprovalsRoHS Compliant|UL Listed|CSA Certified|PROP65: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer
-
Specification Sheet
-
Owners/User Manual
Recently Viewed
Littelfuse® POWR-GARD® LFR60030-1CID Indicating Fuse Block, 600 V AC, 30 A, Class: R, 14 to 6 AWG Wire, 1 Pole
The Littelfuse® Class H/K5 and R blocks offer many benefits such as indication, snap-to-release DIN rail mounting and universal mounting holes. Class H and Class R fuse blocks are dimensionally the same, but Class R blocks incorporate a rejection feature, which only allows Class R fuses to be inserted.
INS-SC-010 Dodge® 123329 203 Normal Duty Set Screw Ball Bearing, 5/8 in Dia Bore, 1.5748 in OD, 1 in W, 2158 lb Dynamic/1079 lb Static Load
INS-SC-010 Dodge® 123329 203 Normal Duty Set Screw Ball Bearing, 5/8 in Dia Bore, 1.5748 in OD, 1 in W, 2158 lb Dynamic/1079 lb Static Load
Browning® 1228865 Finished Bore Straight Miter Gear With Hardened Teeth, Keyway and Setscrew, 1 in Dia Bore
Bevel and miter gearing is a form of gearing in which the tooth-bearing surfaces are the faces of the gears rather than the edges. In bevel and miter gearing, the gears are cone shaped. This allows the edges of the mating gears to mesh and transmit torque. The geometry of the mesh creates a 90 deg angle. As a result, this type of gearing is suitable for applications where a change of direction is required. Other designs exist to create other angles however 90 deg serves the majority of applications. In bevel and miter gearing the input and output shaft are intersecting. It is typical for bevel and miter gear reducers to have lower reduction ratios. For example, 5:1 and lower are typical and they are different than other types of gearing. Two types of bevel and miter gearing are typical. These are straight and spiral. As the name implies, the teeth of straight bevel gears are cut straight. This means that the teeth are oriented perpendicular to the outside edge of the gear. The teeth on spiral bevel gears are cut at an angle to the outside edge of the gear. This type of gearing is said to have "helical" teeth and the angle is called the "helix" angle. Bevel and miter gearing have proven reliable for many years. The use of this type of gearing extends across many industries. Some of these include food processing, woodworking, paper and textile.
MORSE® 22252 1655 Chucking Reamer, 1-1/2 in Dia x 12-1/2 in OAL, 1.249 in Dia Straight Shank, Straight Flute
MORSE® 22252 1655 Chucking Reamer, 1-1/2 in Dia x 12-1/2 in OAL, 1.249 in Dia Straight Shank, Straight Flute
V-BELTOUTSIDE CIRCUMFERENCE 236."-JAS5V2360 >
Dichtomatik 75115266 O-Ring, 255 Dash Number, 5.609 in ID x 5.887 in OD, PTFE, 55 Durometer, Import
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
