Enerpac® GBJ010 Industrial Bottle Jack, 10 ton Lifting, 8.62 in H Min, 17.48 in H Max, 5.9 in L Stroke, 3.74 in L x 5.59 in W Base
Enerpac® GBJ010 Industrial Bottle Jack, 10 ton Lifting, 8.62 in H Min, 17.48 in H Max, 5.9 in L Stroke, 3.74 in L x 5.59 in W Base
-
BrandEnerpac®
-
UPC662005369836
-
Manufacturer Part NumberGBJ010
-
CountryUSA
-
FinishYellow
-
MaterialSteel
-
TypeIndustrial
-
SeriesGBJ
-
Stroke Length5.9 in
-
Lifting Capacity10 ton
- Lower handle effort reduces operator fatigue
- Fully serviceable
- High-strength beam and pump linkage for long life
- Safety relief valve to prevent overload
- Automatic by-pass port to prevent over-extension
- Wiper seal for extended life
- Thick base material with large area for increased strength and stability during lifting
- 1.46 in plunger dia
- 1.46 in saddle dia
-
UNSPSC25174810
-
IncludesPumping Handle
-
Package Description1/PK
-
Standards/ApprovalsANSI Specified|CE Certified|PALD Approved
-
WarrantyLimited
-
Catalog
-
Warranty Information
-
Instruction/Installation Manual
Recently Viewed
Enerpac® GBJ010 Industrial Bottle Jack, 10 ton Lifting, 8.62 in H Min, 17.48 in H Max, 5.9 in L Stroke, 3.74 in L x 5.59 in W Base
Enerpac® GBJ010 Industrial Bottle Jack, 10 ton Lifting, 8.62 in H Min, 17.48 in H Max, 5.9 in L Stroke, 3.74 in L x 5.59 in W Base
741567 DO-IT-BEST/MIDWEST AIR TECH 6" X 44" RED STEEL SCREW-IN EARTH ANCHOR
SCREW INTO THE GROUND TO HOLD DOWN TENTS, CANOPIES, STORAGE BUILDINGS, FENCING, PLAYGROUND EQUIPMENT, TREES, PLANES, AS WELL AS HUNDREDS OF OTHER USES. NOT FOR USE ON MANUFACTURED HOMES.
-JWH741567>
Jacobs® 30428DN Archer® 654 Standard Length Morse Taper Drill Sleeve, #4 Inside x #5 Outside, 3/4 in Projection, 6.69 in OAL
Jacobs® 30428DN Archer® 654 Standard Length Morse Taper Drill Sleeve, #4 Inside x #5 Outside, 3/4 in Projection, 6.69 in OAL
COMPATIBLE WITH MOST PORTABLE STOVES, LANTERNS, HEATERS AND CAMPING APPLIANCES. CONSTRUCTED OF DURABLE STEEL
- JWH824321 >
IN-LINE FENCE STRAINER-JWH745062 >
Gardner Bender PushGard™ 19-PC2 2-Port Push-In Wire Connector With Corrosion Resistant Stainless Steel Spring, 22 to 12 AWG Solid Copper Wire, Polycarbonate
Fast and easy to use, just strip and push conductors into Gardner Bender PushGard connectors to make reliable, secure connections. This case of ten red push-in connectors restrict wire pullout, yet connections are possible with a simple left-right twist and pull. Made of corrosion-resistant stainless steel springs, these connectors have a clear-carbonate housing with color-coded side panels for ease in connection verification and identification.
