Gardner Bender PS-175 UV-Resistant Electrical Staple, 12 AWG, 14 AWG Cable, Plastic
These polyethylene staples with zinc plated nails are designed to offer fast and easy installation when securing most types of non-metallic cables. The zinc plated nails not only resist rust and corrosion but drive together for fast installation with a hammer while the recessed heads ensure minimum exposure and avoid snags. The smooth polyethylene saddle protects wire and will not rust, rot or deteriorate. Use to attach all NM cable to joists, framing and other wood installations.
-
BrandGardner Bender
-
UPC032076661755
-
Manufacturer Part NumberPS-175
-
CountryUSA
-
Cable Size12 AWG, 14 AWG
-
Cable TypeAC/BX/MC/NM/UF
-
MaterialPlastic
-
ColorWhite
-
TypeUV-Resistant
- Secures three conductor 14 AWG and 12 AWG non-metallic BX, MC, AC and UF cable
- Smooth saddle edges prevent damage to cable insulation
- Fast and easy to install both nails drive together without splitting wood
- Nail heads are recessed for minimum exposure
- UV-resistant polyethylene saddle will not rust, rot or deteriorate
- Zinc plated nails-resistant rust and corrosion
- For non-metallic cables
-
Alternative Part Number16793274
-
UNSPSC31162404
-
IDEA Index ID16793274
-
Standards/ApprovalscULus Listed
-
Warranty1 year
-
Specification Sheet
Recently Viewed
Gardner Bender PS-175 UV-Resistant Electrical Staple, 12 AWG, 14 AWG Cable, Plastic
These polyethylene staples with zinc plated nails are designed to offer fast and easy installation when securing most types of non-metallic cables. The zinc plated nails not only resist rust and corrosion but drive together for fast installation with a hammer while the recessed heads ensure minimum exposure and avoid snags. The smooth polyethylene saddle protects wire and will not rust, rot or deteriorate. Use to attach all NM cable to joists, framing and other wood installations.
Makita® VC4710 L Class Portable Dust Extractor, 12 A, 12 gal Gross/9 gal Dry/8 gal Wet Tank, 120 VAC
Makita® VC4710 L Class Portable Dust Extractor, 12 A, 12 gal Gross/9 gal Dry/8 gal Wet Tank, 120 VAC
BBI 087138 Fully Threaded Cap Screw, 3/8-16, 1 in L Under Head, 5 Grade, Carbon Steel, Zinc CR+3
BBI 087138 Fully Threaded Cap Screw, 3/8-16, 1 in L Under Head, 5 Grade, Carbon Steel, Zinc CR+3
Precision Brand® 22L5 Shim Stock, 302 Full Hard Stainless Steel, 50 in Roll L x 6 in W x 0.005 in THK
Stainless steel shim is made from a full hard, cold rolled, 302 stainless steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Widely used in applications where corrosion resistance is required. Used in conventional power plants, nuclear plants, oil and gas refineries and desalinization projects. Precision Brand® shim stock is widely used in the following applications: tool and die set up; alignment; new machine assembly; machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
EATON DG222NRB DG Series Cartridge Fusible General Duty Safety Switch, 240 V AC, 60 A, 3 to 10 hp, 7-1/2 to 15 hp, DPST Contact, 2 Poles
General duty safety switches are used in residential and commercial applications. They are suitable for light duty motor circuits and service entrance applications. Fusible (plug or cartidge) and non-fusible switches are available.
DeWALT® 2750 Concrete Anchor Screw, 3/16 in Dia, 3-3/4 in OAL, Phillips®/Slotted Head Drive, Carbon Steel
The Tapper® anchoring system is a family of screw anchors, specially designed drill bits and installation tools designed to meet the needs of most light to medium duty applications in concrete, block and brick. The Tapper® concrete screw anchor is produced in either hex washer head or Phillips flat head styles from Perma-Seal™ coated or zinc plated carbon steel and type 304 stainless steel. For heavy duty applications, the 3/8 in size is made in zinc plated carbon steel.
