Leviton® L7503 Straight Single Weave Wide Range Wire Mesh Strain Relief Grip, 1/2 in Trade, 0.4 to 0.54 in Cable Openings, Steel, Galvanized
Leviton® wire mesh safety grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications. They are designed to distribute stress over a large area so they can securely hold, pull or support the wire, rope, tubing or fiber optic cable to which they are applied. Leviton® wire mesh safety grips are flexible holding devices used to pull cable, rope or tubing into place, to support it after it has been installed, to prevent cable pullout or to provide strain relief that reduces the arc of bend at points of wire connections or terminations. Available in a wide selection of style, weave, attachment and wire options designed to meet the highest standards for strength, flexibility, durability and longevity.
-
BrandLeviton®
-
UPC078477971253
-
Manufacturer Part NumberL7503
-
CountryUSA
-
Cable Openings0.4 to 0.54 in
-
FinishGalvanized
-
MaterialSteel
-
Mesh Length5-1/2 in
-
Trade Size1/2 in
-
TypeStraight Single Weave Wide Range
-
Connection TypeMNPT
-
Cable TypeSingle Weave
-
Series77 Series
- Strain relief grips are used to connect cords or cable to electrical enclosures and equipment
- These grips prevent pullout due to tension and limit the arc of bend at the point of entry
- Strain is distributed over the length of mesh rather than concentrated at one point or transferred to the internal termination
- 1-1/4 in grip distance
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 25HL60 |
-
Alternative Part Number7357570
-
UNSPSC39131607
-
IDEA Index ID7357570
-
IncludesInsulated Bushing
-
Package DescriptionEACH
-
Standards/ApprovalsUL Listed|CSA Certified
-
Warranty2 Years Limited
-
Specification Sheet
-
Specification Sheet
Recently Viewed
Leviton® L7503 Straight Single Weave Wide Range Wire Mesh Strain Relief Grip, 1/2 in Trade, 0.4 to 0.54 in Cable Openings, Steel, Galvanized
Leviton® wire mesh safety grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications. They are designed to distribute stress over a large area so they can securely hold, pull or support the wire, rope, tubing or fiber optic cable to which they are applied. Leviton® wire mesh safety grips are flexible holding devices used to pull cable, rope or tubing into place, to support it after it has been installed, to prevent cable pullout or to provide strain relief that reduces the arc of bend at points of wire connections or terminations. Available in a wide selection of style, weave, attachment and wire options designed to meet the highest standards for strength, flexibility, durability and longevity.
N14-17 by Coilhose | Coiled Air Hose | 1/4" Hose ID | 1/4" Male NPT Thread | 2 Rigid Fittings | Yellow | Nylon | 17ft
Heritage™ H213014Z3 Metric Straight Zerk Form Grease Fitting, M6x1 Taper Thread, 41 mm OAL, 31 mm L Shank, Steel
Heritage™ H213014Z3 Metric Straight Zerk Form Grease Fitting, M6x1 Taper Thread, 41 mm OAL, 31 mm L Shank, Steel
Remke Tuff-Seal™ RSR-212 Form Size 3 Straight Cord Grip Connector With Locknut, O-Ring, 3/4 in Trade, 3, 4 Conductors, 5/8 to 3/4 in Cable Openings, Aluminum, Nickel Plated
Remke Tuff-Seal™ RSR-212 Form Size 3 Straight Cord Grip Connector With Locknut, O-Ring, 3/4 in Trade, 3, 4 Conductors, 5/8 to 3/4 in Cable Openings, Aluminum, Nickel Plated
Remke Tuff-Seal™ RSR-110 Form Size 2 Straight Cord Grip Connector With Locknut, O-Ring, 1/2 in Trade, 2, 3, 4 Conductors, 0.562 to 0.625 in Cable Openings, Aluminum, Nickel Plated
Remke Tuff-Seal™ RSR-110 Form Size 2 Straight Cord Grip Connector With Locknut, O-Ring, 1/2 in Trade, 2, 3, 4 Conductors, 0.562 to 0.625 in Cable Openings, Aluminum, Nickel Plated
Remke Tuff-Seal™ RSR-213 Straight Cord Grip Connector, 3/4 in Trade, 0.688 to 0.812 in Cable Openings, Aluminum
Tuff-Seal™ RSR series aluminum cord grips are UL listed and CSA certified for use in both indoor and outdoor applications to prevent cable pullout, control arc of bend and to provide a tight seal against environmental elements such as dirt, moisture and coolants. The breadth of the line encompasses conduit sizes from 1/4 to 4 in with fittings offered in machined aluminum, nickel plated aluminum, steel, stainless steel, nylon and Valox®.
