LEVITON 1/2"-MPT .30-0.43 4-1/2" CORD GRIP LEV L-7502
Leviton® wire mesh safety grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications. They are designed to distribute stress over a large area so they can securely hold, pull or support the wire, rope, tubing or fiber optic cable to which they are applied. Leviton® wire mesh safety grips are flexible holding devices used to pull cable, rope or tubing into place, to support it after it has been installed, to prevent cable pullout or to provide strain relief that reduces the arc of bend at points of wire connections or terminations. Available in a wide selection of style, weave, attachment and wire options designed to meet the highest standards for strength, flexibility, durability and longevity.
-
BrandLeviton®
-
UPC078477971239
-
Manufacturer Part NumberL7502
-
CountryUSA
-
Cable Openings0.3 to 0.43 in
-
FinishGalvanized
-
MaterialSteel
-
Mesh Length4-1/2 in
-
Trade Size1/2 in
-
TypeStraight Single Weave Wide Range
-
Connection TypeMNPT
-
Cable TypeSingle Weave
-
Series77 Series
- Strain relief grips are used to connect cords or cable to electrical enclosures and equipment
- These grips prevent pullout due to tension and limit the arc of bend at the point of entry
- Strain is distributed over the length of mesh rather than concentrated at one point or transferred to the internal termination
- 1-1/4 in grip distance
-
Alternative Part Number7357552
-
UNSPSC39131607
-
IDEA Index ID7357552
-
Package DescriptionEACH
-
Standards/ApprovalsCSA Certified|UL Listed
-
Warranty2 Years Limited
-
Specification Sheet
-
Specification Sheet
Recently Viewed
Leviton® wire mesh safety grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications. They are designed to distribute stress over a large area so they can securely hold, pull or support the wire, rope, tubing or fiber optic cable to which they are applied. Leviton® wire mesh safety grips are flexible holding devices used to pull cable, rope or tubing into place, to support it after it has been installed, to prevent cable pullout or to provide strain relief that reduces the arc of bend at points of wire connections or terminations. Available in a wide selection of style, weave, attachment and wire options designed to meet the highest standards for strength, flexibility, durability and longevity.
Creeper, 300 lb Capacity, 40 in L x 17 in W x 4-1/2 in H
Stainless steel shim is made from a full hard, cold rolled, 302 stainless steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Widely used in applications where corrosion resistance is required. Used in conventional power plants, nuclear plants, oil and gas refineries and desalinization projects. Precision Brand® shim stock is widely used in the following applications: tool and die set up; alignment; new machine assembly; machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
4" X 2" SCH-80 CPVC SXS BUSHING-NIB1837420 >
Southwire® Ultratite® 58046201 Type NM Liquid Tight Flexible Non-Metallic Conduit, 1/2 in Trade, 0.622 to 0.642 in ID x 0.83 in OD, 100 ft L, PVC
This Southwire Ultratite 1/2 in. x 100 ft. Flexible Non-Metallic Conduit features a liquid-tight design ideal for protection from liquids, vapors, solids and weather. This product is ideal for installation, operation or maintenance that requires high flexibility. Made with a smooth metal interior for easy wire pulling.
32-OZ LIQUID GLASS PLUS CLEANER-JWH660065 >
