BBI 398160 Flat Washer, 5/8 in, 1-1/2 in OD, 0.078 in THK, Stainless Steel
BBI 398160 Flat Washer, 5/8 in, 1-1/2 in OD, 0.078 in THK, Stainless Steel
-
BrandBBI
-
Manufacturer Part Number398160
-
CountryUSA|Canada
-
Thickness0.078 in
-
MaterialStainless Steel
-
Material GradeA4
-
Nominal Size5/8 in
-
Outside Diameter1-1/2 in
-
UNSPSC31161807
-
Package Description50/CS
-
Catalog
Recently Viewed
BBI 398160 Flat Washer, 5/8 in, 1-1/2 in OD, 0.078 in THK, Stainless Steel
Freud® Precision Shear™ PB-010 Forstner Drill Bit, 1-3/8 in Dia, 3-1/2 in OAL, 3/8 in Shank
New Precision Shearâ„¢ forstner bits feature a double ground, razor sharp serrated edge that slices throughout the rotation of the bit for less splintering and chipping, producing flawless flat-bottom holes. This unique geometric design has multiple cutting edges that produce greater shearing action, allowing for faster rotational speeds and more efficient cutting. Competitive forstner bit designs produce small chips and dust that collect in the cutting area, increasing friction and heat, thus causing the bit to dull quickly. Those designs also create holes with rough edges that require sanding. In addition Precision Shearâ„¢ forstner bits has serrated edges.
GEARWRENCH® 9539N Open End Regular Length Reversible Combination Wrench, 15/16 in Wrench, 12 Points, 15 deg Offset, 14 in OAL, High Alloy Steel, Polished Chrome
The reversible ratcheting combination wrenches from GEARWRENCH® are a staple for every tool box. The flush-mounted reversing lever allows the user to switch motion left to right without needing to remove the wrench from the fastener increasing productivity. The 15 deg offset on the ratcheting box end allows for greater knuckle clearance and safer access to the fasteners. The ratcheting box end is designed to need as little as 5 deg to move fasteners versus 30 deg for standard wrenches and features off-corner loading for a better grip on the fastener and reduces fastener rounding. The wrenches are made from strong alloy steel with a bright, full polish chrome finish.
1/8" X 2" Stainless Steel Cotter Pins
DRILLCO 215N080A 2150N Spiral Point Tap, Right Hand Cutting, M8x1.25 Thread, D5 Thread Limit, Plug Chamfer, 3 Flutes, Oxide Treated, M35 HSS-Co
Nitro-Max ANSI/ANSI taps are produced with a reduced neck to allow for longer reach, improved coolant flow, and easier chip evacuation. These taps offer higher heat resistance and red hardness over conventional High Speed Steel taps. For CNC applications.
7/32" X 1-1/4" Split Roll Pins
