BBI 898438 Wood Screw, #12, 1-1/4 in OAL, Flat Head, Phillips® Drive, Zinc CR+3
BBI 898438 Wood Screw, #12, 1-1/4 in OAL, Flat Head, Phillips® Drive, Zinc CR+3
-
BrandBBI
-
Manufacturer Part Number898438
-
CountryUSA|Canada
-
FinishZinc CR+3
-
Measurement SystemImperial
-
Head TypeFlat
-
Diameter - Thread Size#12
-
Drive TypePhillips®
-
Overall Length1-1/4 in
-
UNSPSC31161508
-
Package Description100/CS
Recently Viewed
BBI 898438 Wood Screw, #12, 1-1/4 in OAL, Flat Head, Phillips® Drive, Zinc CR+3
Dodge® 070279 Type S2000 Pillow Block Roller Bearing Unit, 2 in Dia Bore, 6.06 to 6.44 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8.38 in OAL x 4.56 in OAH
Dodge® 070279 Type S2000 Pillow Block Roller Bearing Unit, 2 in Dia Bore, 6.06 to 6.44 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8.38 in OAL x 4.56 in OAH
Tapered roller bearing are designed such that cup, cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis. Along with metric series bearing, inch series bearing are also available. This type of bearing is suitable for applications that involve heavy or impact loading.
18" LEFT HAND SANDBLASTING GLOVE
Gulf Bearing 3/8" DOUBLE-SHIELDED BALL BEARINGS GUL 1614-2-Z
Precision ground 1600® Series bearings are specially designed to provide a line of low cost yet high quality bearings for adaptation to a majority of precision bearing applications. They are made in easy to use inch dimensions and are recommended for medium loads and for maximum speeds in the range of 5000 rpm. The 1600® Series bearings are precision ground on all surfaces with exceptional care given to the ball grooves. Careful heat treatment provides a uniform and exact degree of hardness for maximum life. A ball retainer, or separator, is used to increase the range of allowable speeds by reducing ball-to-ball contact friction.
Dichtomatik N70116 O-Ring, 116 Dash Number, 0.737 in ID x 0.943 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
