BBI 581814 1960 Semi-Standard Round Socket Cap Screw, 1-8, 4-1/4 in OAL, Alloy Steel, 3A Grade
BBI 581814 1960 Semi-Standard Round Socket Cap Screw, 1-8, 4-1/4 in OAL, Alloy Steel, 3A Grade
-
BrandBBI
-
UPC662403678929
-
Manufacturer Part Number581814
-
CountryUSA
-
FinishPlain/Thermal Black Oxide
-
MaterialAlloy Steel
-
Material SpecificationASTM A574
-
Measurement SystemImperial
-
TypeSemi-Standard
-
Grade3A
-
Series1960
-
Diameter - Thread Size1-8
-
Drive Size3/4 in
-
Drive TypeHex
-
Overall Length4-1/4 in
- UNC thread
-
UNSPSC31161501
-
Package Description10/CS
-
Standards/ApprovalsASME/ANSI B18.3 2002
-
Catalog
Recently Viewed
BBI 581814 1960 Semi-Standard Round Socket Cap Screw, 1-8, 4-1/4 in OAL, Alloy Steel, 3A Grade
BBI 581814 1960 Semi-Standard Round Socket Cap Screw, 1-8, 4-1/4 in OAL, Alloy Steel, 3A Grade
BBI 532138 Partially Threaded Round Socket Cap Screw, M8x1.25, 90 mm OAL, Alloy Steel, 12.9 Grade
BBI 532138 Partially Threaded Round Socket Cap Screw, M8x1.25, 90 mm OAL, Alloy Steel, 12.9 Grade
Dodge® 004072 Babbitted Rigid Pillow Block Plain Sleeve Bearing, 2-7/16 in Dia Bore, 7-3/4 to 8-1/4 in L Bolt Center-to-Center, 2-1/8 in Base to Bore Centerline, 10-1/4 in OAL x 4-1/4 in OAH
Dodge® 004072 Babbitted Rigid Pillow Block Plain Sleeve Bearing, 2-7/16 in Dia Bore, 7-3/4 to 8-1/4 in L Bolt Center-to-Center, 2-1/8 in Base to Bore Centerline, 10-1/4 in OAL x 4-1/4 in OAH
1-1/2" X 3/4" COPPER REDUCER BUSHING-NIB600211/2X3/4 >
1/4"-OD TUBE X 1/8"-28-TPI MALE THREAD FITTING - LNC244055 >
Koyo HJ-324116 Inch Series Caged Heavy Duty Needle Roller Bearing, 2 in Dia Bore, 2-9/16 in OD, 1 in W, 12100 lbf Dynamic/20900 lbf Static Load
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
