BBI 221220 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 3/4 in Dia x 2 in L Shoulder, 3/4-5/8-11
BBI 221220 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 3/4 in Dia x 2 in L Shoulder, 3/4-5/8-11
-
BrandBBI
-
Manufacturer Part Number221220
-
CountryUSA
-
FinishPlain/Thermal Black Oxide
-
MaterialASTM A574 Alloy Steel
-
Thread TypeUNC
-
Measurement SystemImperial
-
HardnessHRC 36-43
-
Head TypeRound Socket
-
Shoulder Diameter3/4 in
-
Diameter - Thread Size3/4-5/8-11
-
Shoulder Length2 in
-
Drive Size3/8 in
-
Drive TypeHex
-
UNSPSC31161517
-
Package Description10/CS
-
Standards/ApprovalsASME/ANSI B18.3-2002
-
Catalog
Recently Viewed
BBI 221220 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 3/4 in Dia x 2 in L Shoulder, 3/4-5/8-11
BBI 221220 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 3/4 in Dia x 2 in L Shoulder, 3/4-5/8-11
Drillco 437E124 4375E Imperial Chucking Reamer, 3/8 in Dia x 7 in OAL, Straight Shank, Spiral Flute
Straight Shank Chucking Reamers are designed for general purpose reaming in machines such as drill presses, turret lathes, and screw machines. They have shorter and deeper flutes than hand reamers. For machine reaming.
Dichtomatik N70433 O-Ring, 433 Dash Number, 5.475 in ID x 6.025 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
BBI 401296 Fully Threaded Cap Screw, 1/2-13, 1-1/4 in L Under Head, 316 Grade, Stainless Steel
BBI 401296 Fully Threaded Cap Screw, 1/2-13, 1-1/4 in L Under Head, 316 Grade, Stainless Steel
Browning® 1045228 VP Series Type 1 Variable Pitch Sheave, 1/2 in Finished Bore, 2-1/2 in OD, 1 Groove, 1.6 to 2.4 in Dia Pitch, 17/32 to 25/32 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
BBI 221157 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 1/2 in Dia x 5 in L Shoulder, 3/8-16
BBI 221157 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 1/2 in Dia x 5 in L Shoulder, 3/8-16
