BBI 711036 Semi-Standard Shoulder Screw, Round Head, Alloy Steel, 1/4 in Dia x 3-1/2 in L Shoulder, #10-24
BBI 711036 Semi-Standard Shoulder Screw, Round Head, Alloy Steel, 1/4 in Dia x 3-1/2 in L Shoulder, #10-24
-
BrandBBI
-
UPC662403695773
-
Manufacturer Part Number711036
-
CountryUSA
-
FinishPlain
-
MaterialAlloy Steel
-
Thread TypeUNC
-
Measurement SystemImperial
-
TypeSemi-Standard
-
HardnessHRC 36-43
-
Head TypeRound
-
Shoulder Diameter1/4 in
-
Diameter - Thread Size#10-24
-
Shoulder Length3-1/2 in
-
Drive Size1/8 in
-
Drive TypeHex
-
UNSPSC31161517
-
Package Description25/CS
-
Standards/ApprovalsASME/ANSI B18.3-2002
Recently Viewed
BBI 711036 Semi-Standard Shoulder Screw, Round Head, Alloy Steel, 1/4 in Dia x 3-1/2 in L Shoulder, #10-24
BBI 711036 Semi-Standard Shoulder Screw, Round Head, Alloy Steel, 1/4 in Dia x 3-1/2 in L Shoulder, #10-24
FYH® SBB203 17MMKG5 SBB Cylindrical Ball Bearing Insert, 17 mm Dia Bore, 1.57 in OD, 0.86 in W, 9.55 kN Dynamic/4.8 kN Static Load
FYH® SBB203 17MMKG5 SBB Cylindrical Ball Bearing Insert, 17 mm Dia Bore, 1.57 in OD, 0.86 in W, 9.55 kN Dynamic/4.8 kN Static Load
Browning® PC9301 Waste Pack Kit
HCI Preferred Supplier 20081 90 deg Swivel Elbow, 1/4 in Nominal, Push-In x MNPTF End Style, Forged Brass
HCI Preferred Supplier 20081 90 deg Swivel Elbow, 1/4 in Nominal, Push-In x MNPTF End Style, Forged Brass
ISOSTATIC™ Oilube® 402236 Round Bore Flange Bearing, 5/8 in Dia Bore, 3/4 in OD, 5/8 in W, 1 in Dia Flange
ISOSTATIC™ Oilube® 402236 Round Bore Flange Bearing, 5/8 in Dia Bore, 3/4 in OD, 5/8 in W, 1 in Dia Flange
Browning® 1296482 T55L Automatic Torque Limiter, 1 in Finished Bore, 5-1/2 in OD, 3800 in-lb (1-Spring)/6800 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
