BBI 221187 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 5/8 in Dia x 3-1/2 in L Shoulder, 1/2-13
BBI 221187 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 5/8 in Dia x 3-1/2 in L Shoulder, 1/2-13
-
BrandBBI
-
Manufacturer Part Number221187
-
CountryUSA
-
FinishPlain/Thermal Black Oxide
-
MaterialASTM A574 Alloy Steel
-
Thread TypeUNC
-
Measurement SystemImperial
-
HardnessHRC 36-43
-
Head TypeRound Socket
-
Shoulder Diameter5/8 in
-
Diameter - Thread Size1/2-13
-
Shoulder Length3-1/2 in
-
Drive Size5/16 in
-
Drive TypeHex
-
UNSPSC31161517
-
Package Description10/CS
-
Standards/ApprovalsASME/ANSI B18.3-2002
-
Catalog
Recently Viewed
BBI 221187 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 5/8 in Dia x 3-1/2 in L Shoulder, 1/2-13
BBI 221187 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 5/8 in Dia x 3-1/2 in L Shoulder, 1/2-13
Lasco® 205-015 Nipple, 1/2 in x 1-1/2 in L Thread, PVC, SCH 80/XH, Domestic
Lasco® 205-015 Nipple, 1/2 in x 1-1/2 in L Thread, PVC, SCH 80/XH, Domestic
Browning® 1296532 T55L Automatic Torque Limiter, 1-7/16 in Finished Bore, 5-1/2 in OD, 3800 in-lb (1-Spring)/6800 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
Morse® 465704 TL Series Torque Limiter, 7/8 in Straight Bore, 2-1/2 in OD, 5 to 20 in-lb Torque
The Morse® torque limiter is a protective device that limits torque transmitted in a drive system by slipping when the torque demand exceeds a preset value as a result of shock loads, overloads or machine jams. It automatically re-engages when the overload torque has passed, no resetting is required. The Morse® torque limiter helps prevent machine damage and eliminates costly downtime. Using spring loaded friction surfaces for its operation, the Morse® torque limiter presets slip torque by adjustment of the spring force. This device can be used with a sprocket, gear, sheave or flange plate as the center member that is clamped between two friction facings.
1-1/4" METAL STRAP SEALERS-DUBSSN11/4 >
Dichtomatik N70147 O-Ring, 147 Dash Number, 2.675 in ID x 2.881 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
