ANR 150017 11/64" E-CLIP RETAINING RINGS
THE BASIC E-CLIP PROVIDES RELATIVELY LARGE SHOULDER HEIGHT FOR A SMALL SHAFT DIAMETER. ONLY GROOVE SIZE IS CRITICAL WITH THIS TYPE OF CIRCLIP, THE SHAFT DIAMETER CAN BE VARIED WIDELY
-ANR150017 >
Recently Viewed
THE BASIC E-CLIP PROVIDES RELATIVELY LARGE SHOULDER HEIGHT FOR A SMALL SHAFT DIAMETER. ONLY GROOVE SIZE IS CRITICAL WITH THIS TYPE OF CIRCLIP, THE SHAFT DIAMETER CAN BE VARIED WIDELY
-ANR150017 >
Browning® 765820 VER 200 Standard Duty Straight Bore Ball Bearing Insert With Seal Flinger and Snap Ring, 5/8 in Dia Bore, 2.063 in OD, 1 Rows, 1.219 in W, 2108 lb Dynamic/1117 lb Static Load
Browning® VER bearings feature black oxide treated inner and outer rings and extended inner race bearing with ball riding nylon retainer. Shaft lock is achieved by 120 deg spaced diamond faceted setscrew locking. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
FYH® SB206 20KP8G5 SB Series Lightweight Pillow Block Unit, 1-1/4 in Dia Bore, 1.18 in W, 19.5 kN Dynamic/11.3 kN Static Load
FYH® SB206 20KP8G5 SB Series Lightweight Pillow Block Unit, 1-1/4 in Dia Bore, 1.18 in W, 19.5 kN Dynamic/11.3 kN Static Load
9/16" CRESCENT RETAINING RINGS-ANR180056>
3/4" ROUND SWIVEL EYE SNAP HOOKS-NTL222836 >
THE BASIC E-CLIP PROVIDES RELATIVELY LARGE SHOULDER HEIGHT FOR A SMALL SHAFT DIAMETER. ONLY GROOVE SIZE IS CRITICAL WITH THIS TYPE OF CIRCLIP, THE SHAFT DIAMETER CAN BE VARIED WIDELY
-ANR150012 >
