Heritage™ BPS-214 Imperial Bridge Pin, 0.093 in Dia x 2-1/2 in L, Fits Shaft 3/8 to 3/4 in, Stainless Steel, Plain
Heritage™ BPS-214 Imperial Bridge Pin, 0.093 in Dia x 2-1/2 in L, Fits Shaft 3/8 to 3/4 in, Stainless Steel, Plain
-
BrandHeritage™
-
Manufacturer Part NumberBPS-214
-
CountryUSA
-
FinishPlain
-
MaterialStainless Steel
-
Fits Shaft Size3/8 to 3/4 in
-
TypeImperial
-
Grade302/304
-
Diameter0.093 in
-
Length2-1/2 in
- Bridge pins are simple and extremely versatile wire forms used as locking devices
- They are reusable and cost effective
- Commonly used on clevis pins and shafts
-
UNSPSC31163204
-
Package Description25/PK
-
Standards/ApprovalsRoHS Compliant|PROP65: This product can potentially expose you to chemicals including lead, nickel and chromium which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Recently Viewed
Heritage™ BPS-214 Imperial Bridge Pin, 0.093 in Dia x 2-1/2 in L, Fits Shaft 3/8 to 3/4 in, Stainless Steel, Plain
Heritage™ BPS-214 Imperial Bridge Pin, 0.093 in Dia x 2-1/2 in L, Fits Shaft 3/8 to 3/4 in, Stainless Steel, Plain
MORSE® 22211 1655 Chucking Reamer, 0.374 in Dia x 7 in OAL, 0.3105 in Dia Straight Shank, Straight Flute
MORSE® 22211 1655 Chucking Reamer, 0.374 in Dia x 7 in OAL, 0.3105 in Dia Straight Shank, Straight Flute
INS-SC-008 Dodge® 123328 203 Normal Duty Set Screw Ball Bearing, 1/2 in Dia Bore, 1.5748 in OD, 1 in W, 2158 lb Dynamic/1079 lb Static Load
INS-SC-008 Dodge® 123328 203 Normal Duty Set Screw Ball Bearing, 1/2 in Dia Bore, 1.5748 in OD, 1 in W, 2158 lb Dynamic/1079 lb Static Load
Milwaukee Hand Trucks 33800 Hand Truck Furniture Dolly, 1000 lb Load, 6 in H x 30 in W x 18 in D, Wood
Milwaukee Hand Trucks 33800 Hand Truck Furniture Dolly, 1000 lb Load, 6 in H x 30 in W x 18 in D, Wood
Thomson® 60 Case® LinearRace® SB20 Standard Type SB Shaft Support Block, 1-1/4 in Dia Shaft, 4 in L x 1.13 in W x 3 in H
Shaft support blocks are used for end or intermittent support where loads are light and deflection between supports is not a problem. Unlike shaft support rails, blocks do not permit longitudinal passage of open-type Ball Bushing® bearings. Type SB shaft support blocks enable clamping of shafts and eliminate the need for bolts, to maintain shaft position. Shimming is suggested for high-precision applications to eliminate the effect of variations in surface of base or manufacturing tolerances between supports.
CRIMPED 3/4" X .014 X 1/4"-SHANK WIRE END BRUSH - SAI02702 >
