716256 DO-IT-BEST/SPEECO 3/8" X 2-3/8" DRAW BAR HITCH PIN
HANDLE-LOK HITCH PIN. SPRING MADE OF STEEL WIRE HOLDS PINS IN PLACE. FEATURES A GROOVED PIN TO SECURE WIRE. SPRING MADE OF STEEL WIRE HOLDS PINS IN PLACE. GROOVED PIN TO SECURE WIRE.
JWH716256 >
Recently Viewed
HANDLE-LOK HITCH PIN. SPRING MADE OF STEEL WIRE HOLDS PINS IN PLACE. FEATURES A GROOVED PIN TO SECURE WIRE. SPRING MADE OF STEEL WIRE HOLDS PINS IN PLACE. GROOVED PIN TO SECURE WIRE.
JWH716256 >
Hougen® RotaLoc Plus™ 17822 Stack-Cut Geometry Annular Cutter, 11/16 in Dia Cutter, 1 in D Cutting, M42 HSS, Bayonet Style Twist Lock Shank
RotaLoc Plus™ Annular Cutters are designed for the Hougen® HMD130 low profile drill. They're made of M42 HSS, feature stack cut geometry for penetrating multiple plates in a single pass and are designed for a full 1 in depth of cut. They feature a 5/8 in bayonet style shank mounting for fast change out, with no tools required to install in the drill spindle and can be as easily removed. For optimum cutter tool life and cutter efficiency use Hougen® Slick-Stik™ lubricant or RotaGel™ cutting lube.
Caged roller followers provide large internal grease storage capacity for applications where relubrication is infrequent. Cage guided rollers and a very heavy outer ring cross section permit operation at high loads and high speeds. Caged roller followers are avail able with and with out seals. The unsealed design provides the additional advantages of very low friction to prevent skidding in lightly loaded applications and provides for flow-through lubrication. Caged roller followers normally mount directly on a hardened and ground pin. RBC® offers a line of Precision Ground Inner Rings to simplify application of caged roller followers.
OIL FILTER-WIX57085>
McGill® 0001630000 MI Series Narrow Machined Separable Inner Ring With Oil Hole and Annular Groove, 1 in ID x 1.2491 in OD, 1.01 in OAW, For Use With GUIDEROL® GR 20 N, CAGEROL® MR 20 N Bearing, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
