NAILS FOR AIR POWERED, ELECTRIC, & NAILERS
8-D .099" GALV/COATED PIN SHANK-BOSAC8D099GAL>
5/8" 18-GA BRAD NAILS--BOX/5000-PORBN18063 >
1" 19-GA GALV/BRADS-BOSBT1309B>
13/16" 19-GA GALV/BRADS-BOSBT1314B>
2-1/2" 15-GA NAILS--BX/4000-PORDA15250 >
2" 15-GAUGE STEEL-BOSF1532>
1.25" X 18-GA GALVANIZED BRADS--BX/5000-PASFB832 >
3/8" CLIP FRAMING NAILS, BX/5000-PORFC13238>
CLIP HEAD NAILS--BX/2500-PORFC31300 >
CLIPPED HEAD FRAMING NAILS--BX/2500-PORFC31350 >
1-1/4" STEEL 15-GAUGE-BOSFN1520>
1-1/2" STEEL 15-GAUGE FINISH NAIL-BOSFN1524>
13/4 STEEL 15 GAUGE-BOSFN1528>
.120" X 3" ROUND HEAD DECKING NAIL-PORFR20300 >
AIR ROUND HEAD FRAMING NAIL GUN-PORFR350A >
10-D .120" PLAIN SHANK GALV/NAILS-BOSS10DGAL>
.131" 16D PLAIN SHANK COATED NAILS-BOSS16D131>
.120" PLAIN SHANK COATED NAILS 6-D-BOSS6DGAL2M>
.120" 8-D PLAIN SHANK GALV/NAILS-BOSS8DGAL>
.120" PLAIN SHANK COATED NAILS 12D-BOSS-12-D >
16-D .131" PLAIN SHANK GALVANIZED NAILS-BOSS-16-D-131-GAL >
8-D PNEUMATIC STICK NAILS--BOX OF 2000-BOSS8D>
6-D 15-GA BRT FINISH-PASSB152>
Recently Viewed
6" X 3/4" X 1" 60G BENCH GRINDING WHEEL-PEABA634060 >
Channellock® CODE BLUE® 424 Tongue and Groove Plier, 1/2 in Nominal, 0.33 in L x 0.13 in THK C1080 High Carbon Steel Straight Jaw, 4-1/2 in OAL
At 4-1/2 in length, the 424 is the smallest straight jaw in the Channellock® tongue and groove family and can be easily and conveniently transported in a pocket or small tool bag. This plier is built to last with a PermaLock® fastener to eliminate nut and bolt failure, patented reinforcing edge to minimize stress breakage and right angle, laser heat treated teeth to provide a better, longer lasting grip.
DRILLCO 20PF132C 2000PF Super High Performance Spiral Flute Tap, Right Hand Cutting, 1/2-13 Thread, H5 Thread Limit, Bottoming Chamfer, 3 Flutes, Bright, HSS
These taps are designed for machine tapping in a wide range of material groups, including difficult to machine materials such as stainless steel. The Nitro multi-application spiral flute tap improves thread quality, and aids in chip evacuation.
DRILLCO 20PF124C 2000PF Super High Performance Spiral Flute Tap, Right Hand Cutting, 3/8-16 Thread, H3 Thread Limit, Bottoming Chamfer, 3 Flutes, Bright, HSS
These taps are designed for machine tapping in a wide range of material groups, including difficult to machine materials such as stainless steel. The Nitro multi-application spiral flute tap improves thread quality, and aids in chip evacuation.
Diablo® D1050X Combination Circular Saw Blade, 10 in Dia x 0.071 in THK, 5/8 in Arbor, 50 Teeth
Diablo® combination blade is ideal for ripping and crosscutting wood and wood composites with the goal of a smooth finish. The best choice for a table saw when one blade is needed for ripping and crosscutting. Each set of 5 teeth is separated by a large gullet. Diablo® large gullet provides the chip removal space required while ripping and the close grouping of teeth within the set provide the smaller bite size required when crosscutting.
