NAILS FOR AIR POWERED, ELECTRIC, & NAILERS
6-D 15-GA BRT FINISH-PASSB152>
8-D PNEUMATIC STICK NAILS--BOX OF 2000-BOSS8D>
16-D .131" PLAIN SHANK GALVANIZED NAILS-BOSS-16-D-131-GAL >
.120" PLAIN SHANK COATED NAILS 12D-BOSS-12-D >
.120" 8-D PLAIN SHANK GALV/NAILS-BOSS8DGAL>
.120" PLAIN SHANK COATED NAILS 6-D-BOSS6DGAL2M>
.131" 16D PLAIN SHANK COATED NAILS-BOSS16D131>
10-D .120" PLAIN SHANK GALV/NAILS-BOSS10DGAL>
AIR ROUND HEAD FRAMING NAIL GUN-PORFR350A >
.120" X 3" ROUND HEAD DECKING NAIL-PORFR20300 >
13/4 STEEL 15 GAUGE-BOSFN1528>
1-1/2" STEEL 15-GAUGE FINISH NAIL-BOSFN1524>
1-1/4" STEEL 15-GAUGE-BOSFN1520>
CLIPPED HEAD FRAMING NAILS--BX/2500-PORFC31350 >
CLIP HEAD NAILS--BX/2500-PORFC31300 >
3/8" CLIP FRAMING NAILS, BX/5000-PORFC13238>
1.25" X 18-GA GALVANIZED BRADS--BX/5000-PASFB832 >
2" 15-GAUGE STEEL-BOSF1532>
2-1/2" 15-GA NAILS--BX/4000-PORDA15250 >
13/16" 19-GA GALV/BRADS-BOSBT1314B>
1" 19-GA GALV/BRADS-BOSBT1309B>
5/8" 18-GA BRAD NAILS--BOX/5000-PORBN18063 >
8-D .099" GALV/COATED PIN SHANK-BOSAC8D099GAL>
BOSTITCH NAILS-BOSAC8D099>
Recently Viewed
Milwaukee® 48-20-5060 Heavy Duty Thin Wall Core Bit, 5 in Drill - Fraction, 5 in Drill - Decimal Inch, Carbide
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) SDS Plus drive shank must be used to drive the core bit. Use 48-20-6155 center pin and 48-20-6162 guide plate for positioning and starting the hole. Thin wall core bits are available from 1 in. to 6 in. diameters. See thick wall core bits for cured concrete and/or larger hammers.
metabo® 674706000 Pro 4 2-Cutter Hammer Drill Bit, 3/16 in Drill Bit, Chisel Cutting, SDS-Plus® Shank, 10 in D Cutting, Carbide Cutting Edge, 12 in OAL
metabo® 674706000 Pro 4 2-Cutter Hammer Drill Bit, 3/16 in Drill Bit, Chisel Cutting, SDS-Plus® Shank, 10 in D Cutting, Carbide Cutting Edge, 12 in OAL
CORD AND CABLE CONNECTOR, 3/4" HUB 7/8" X 1-38, .625 - .750 CABLE RANGE-APLCG6275 >
metabo® 674716000 Pro 4 2-Cutter Hammer Drill Bit, 1/2 in Drill Bit, Chisel Cutting, SDS-Plus® Shank, 8 in D Cutting, Carbide Cutting Edge, 10 in OAL
metabo® 674716000 Pro 4 2-Cutter Hammer Drill Bit, 1/2 in Drill Bit, Chisel Cutting, SDS-Plus® Shank, 8 in D Cutting, Carbide Cutting Edge, 10 in OAL
RIDGID® 18383 Head Assembly With Lever Bolt and Lock Nut, For Use With: Model S36 Bolt Cutter
RIDGID® 18383 Head Assembly With Lever Bolt and Lock Nut, For Use With: Model S36 Bolt Cutter
RIDGID® 18368 Head Assembly With Lever Bolt and Lock Nut, For Use With: Model S18 Bolt Cutter
RIDGID® 18368 Head Assembly With Lever Bolt and Lock Nut, For Use With: Model S18 Bolt Cutter
