MACHINERY EYE BOLTS WITHOUT SHOULDER
1/4" X 5" ZINC EYEBOLT-NTL159889 >
1/4" X 6" ZINC EYEBOLT-NTL159897 >
1/2" X 4" ZINC EYEBOLT-NTL167155 >
1/2" X 6" ZINC PLATED EYEBOLT-NTL167163 >
1/2" X 10" ZINC EYEBOLT-NTL167189 >
3/16" X 1-1/2" EYEBOLT-NTL221051 >
5/16" X 5" ZINC-PLATED EYEBOLT-NTL221234 >
3/8" X 3" ZINC-PLATED EYEBOLT-NTL221259 >
1/2" X 12" ZINC-PLATED EYEBOLT-NTL221341 >
1/2" X 8" ZINC-PLATED EYEBOLT-NTL221531 >
5/16" X 5" HOOK BOLT-NTL221689 >
3/8" X 7" HOOK BOLT WITH NUTS-NTL221697 >
89-002 Armstrong Tools 5/16" X 1-1/8" Lifting Eyes (eye Bolt) Plain
5/16" X 1-1/8" LIFTING EYES (EYE BOLT) PLAIN PATTERN
89-003 Armstrong Tools 3/8" X 1-1/4" Lifting Eyes (eye Bolt) Plain
3/8" X 1-1/4" LIFTING EYES (EYE BOLT) PLAIN PATTERN
89-004 Armstrong Tools 7/16" X 1-3/8" Lifting Eyes (eye Bolt) Plain
7/16" X 1-3/8" LIFTING EYES (EYE BOLT) PLAIN PATTERN-ARS89004 >
1/2" X 1-1/2" LIFTING EYES (EYE BOLT) PLAIN PATTERN-ARS89005 >
89-007 Armstrong Tools 5/8" X 1-3/4" Lifting Eyes (eye Bolt) Plain
5/8" X 1-3/4" LIFTING EYES (EYE BOLT) PLAIN PATTERN
3/4" X 2" LIFTING EYES (EYE BOLT) PLAIN PATTERN-ARS89008 >
89-010 Armstrong Tools 1" X 2-1/2" Lifting Eyes (eye Bolt) Plain
1" X 2-1/2" LIFTING EYES (EYE BOLT) PLAIN PATTERN-ARS89010 >
Material: Forged steel, quenched, and tempered. Application: Recommended primarily for straight, in-line pulls. Finish: Hot dip galvanized after threading Safety Factor: Fatigue rated at 1.5 times the Working Load Limit (WLL) for 20,0
Forged Steel Quenched & Tempered Regular Eye Bolt. Recommended For In-Line Pull. Fatigue Rated At 1-1/2 Times. The WLL at 20000 Cycles. Meets Or Exceeds All Requirements of ASME B30.26
Crosby Eye Bolt, Series: G-291, Measurement System: Imperial, 1/4 in Thread, 2 in Shank Length, Forged Steel, Hot Dipped Galvanized, 1/2 in ID Eye, 1 in OD Eye, UNC Thread, 3.06 in Overall Length, 650 lb Working Load, 1-1/2 in Thread Length
Fatigue rated at 1-1/2 times the working load limit at 20000 cycles
Hot dip galvanized after threading (UNC)
Furnished with standard hot dip galvanized hex nuts
Recommended for in-line pull
Importantly, these bolts meet other critical performance requirements including fatigue life, impact properties and material traceability
The Crosby G-291 3/4x12 (Crosby Stock Number 1043659) is a premier, heavy-duty Regular Nut Eye Bolt engineered specifically for straight-line, in-line industrial lifting and rigging applications.
Working Load Limit (WLL): 5,200 lbs (2.6 tons) for secure, in-line pulls. Material: Forged carbon steel, which is quenched and tempered for high structural reliability. Coating: Hot-dip galvanized finish providing robust environmental and rust resistance. Threading: Standard unified coarse threading (UNC). Hardware Included: Shipped complete with a matching, hot-dip galvanized hex nut.
Recently Viewed
1/2" STRAIGHT SUPPLY LINE CONNECT-JWH407116 >
3/4" -MALE PIPE THREADX4-1/2" BLACK NIPPLE-FIT3/4X41/2BN >
DEEP WELL PAINT TRAY LINER-JWH788649 >
Proto® J2641SW Heavy Duty Striking Wrench, Imperial, 2-9/16 in Box End Wrench, 12 Points, 13-1/2 in OAL, 1-1/2 in THK Box End, Black Oxide
Coilhose® PFE61000T Flexeel® PFE6 Straight Air Hose, 3/8 in, 1000 ft L, 200 psi at 70 deg F, Reinforced Polyurethane, Domestic
Flexeel® reinforced polyurethane is an extremely flexible coil with excellent memory, a small bend radius, and a tight coil diameter that reduces work and storage space. Flexeel® coil is the original reinforced polyurethane coil. This hose is extremely lightweight and is extruded with an inner-layer, a layer of reinforced braiding, and an outside jacket. This extrusion process yields an "integral piece" that ensures the integrity of the hose over long periods of use. All of this yields a strong, durable hose with an increased working pressure. These units are equipped with reusable fittings that allow in-field repairs if necessary. Flexeel® coils feature straight sections measuring 16" at the tool end, and 8" at the supply end, eliminating the need for an additional whip hose.
CAULK STRIP, TUB AND WALL SEALER IS PRESSED INTO PLACE TO CREATE A SEAL TO PREVENT WATER SEEPAGE-JWH427032 >
