1/2" X 12" SQUARE S/STEEL KEYSTOCK Percision Brand PRC 57507
STAINLESS STEEL KEYSTOCK IS AN EXCELLENT ALTERNATIVE TO STEEL KEYSTOCK WHEN CORROSION RESISTANCE IS A CONCERN FREQUENTLY USED IN FOOD AND MARINE APPLICATIONS. MADE FROM 300 SERIES STAINLESS STEEL. MOST TOLERANCES ON SQUARE DIMENSIONS ARE UNDERSIZED, 300 STAINLESS STEEL, 1 FT LENGTH, 1/2" WIDTH, 1/2" HEIGHT, PLAIN, SQUARE
Recently Viewed
STAINLESS STEEL KEYSTOCK IS AN EXCELLENT ALTERNATIVE TO STEEL KEYSTOCK WHEN CORROSION RESISTANCE IS A CONCERN FREQUENTLY USED IN FOOD AND MARINE APPLICATIONS. MADE FROM 300 SERIES STAINLESS STEEL. MOST TOLERANCES ON SQUARE DIMENSIONS ARE UNDERSIZED, 300 STAINLESS STEEL, 1 FT LENGTH, 1/2" WIDTH, 1/2" HEIGHT, PLAIN, SQUARE
Browning® Classical Gripbelt® 1042134 AK Series Type 2 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 4.45 in OD, 4.4 in (A)/3.86 in (3L) Dia Pitch, 3/4 in W Face
Browning® Classical Gripbelt® 1042134 AK Series Type 2 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 4.45 in OD, 4.4 in (A)/3.86 in (3L) Dia Pitch, 3/4 in W Face
Alemite® 1743-B Straight Drive Fitting, 35/64 in OAL, 1/4 in L Shank, Trivalent Zinc Plated
Alemite® 1743-B Straight Drive Fitting, 35/64 in OAL, 1/4 in L Shank, Trivalent Zinc Plated
The 5000® Series of bearings is similar in construction to the 400® Series bearing except it has a flange on the outer ring to locate the bearing when pressed into a tube or housing, thus eliminating the need for an external mounting device. The bearings are designed for moderate loads and speeds where running accuracy and noise level requirements do not warrant the more expensive precision ground bearings. This series of bearings feature a full ball complement without a retainer. The rings are case hardened and the soft steel band on the outer ring of the unitized assembly allows the bearing to be pressed into a housing without the necessity of close housing tolerances. The bearings are supplied pregreased as a standard. The bearings are designed for use in applications with speeds not exceeding 1200 rpm.
Dodge® Tigear-2® 26Q15L56 Standard Right Angle Worm Gear Speed Reducer, Quill Input, Solid A Shaft Output, 3.62 hp, 15:1 Gear, 117 rpm Maximum Output, 1708 in-lb Torque Rating
The speed reducer shall be a single reduction worm gear reducer incorporating three input configurations - a quill style for direct attachment of electric motors, a separate keyed input shaft suitable for flexible coupling to a footed motor or belt and pulley input configuration and a motor adapter style input that employs a three piece coupling to connect electric motors to the reducer. These input configurations shall be available in both solid and hollow output shaft designs. The reducer shall be manufactured in the United States of America.
Kuriyama ABF300 ABF Pin Lug Hose Aluminum Shank, 3 in Nominal, NPSM End Style, Import
