MAK-A-KEY 6504370437-12 Imperial Undersized Key Stock, 1 ft L x 7/16 in W x 7/16 in H, 4140 Carbon Steel
A stock of material that is one foot or greater in length, and from which shaft keys are made. We manufacture keystock to suit every application need you have, in every size, grade and tolerance imaginable. Available in stocked standard sizes or custom made to your specifications.
-
BrandMAK-A-KEY
-
Manufacturer Part Number6504370437-12
-
CountryUSA
-
FinishPlain
-
MaterialCarbon Steel
-
Material Grade4140
-
TypeImperial Undersized
-
Hardness85 HRB
-
Height7/16 in
-
Width7/16 in
-
Length1 ft
-
StyleSquare
-
UNSPSC31163208
-
Package Description1/PK
-
Standards/ApprovalsASTM A29|RoHS Compliant|PROP65: This product can potentially expose you to chemicals including lead, nickel and chromium which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
-
Catalog
Recently Viewed
MAK-A-KEY 6504370437-12 Imperial Undersized Key Stock, 1 ft L x 7/16 in W x 7/16 in H, 4140 Carbon Steel
A stock of material that is one foot or greater in length, and from which shaft keys are made. We manufacture keystock to suit every application need you have, in every size, grade and tolerance imaginable. Available in stocked standard sizes or custom made to your specifications.
Browning® 1020866 MVP® Variable Pitch Sheave, 1 to 2-5/8 in Bushed Bore, 10.56 in OD, 3 Grooves, 10.6 to 8.4 in Dia Pitch, 4-7/16 to 5-1/32 in W Face
MVP® sheaves are a series of angular faced center flanges which are bolted to the fixed flange mounted on the barrel. They also contain another series of angular faced flanges which are bolted to the end flange and threaded locking collar. When the threaded locking collar is turned clockwise, it moves the angular flanges closer together increasing the pitch diameter. When the collar is moved counterclockwise, the flanges are moved apart, decreasing the pitch diameter. The pitch diameter is infinite. This means the collar adjustment can be turned and stopped at any time regardless of location between the minimum and the maximum setting. When the desired diameter is obtained, the locking collar is locked by tightening screws. In contrast VL, VP, and VM sheaves are limited by half- turn or 180 deg adjustment points.
1/4" DIAMETERX1" SHOULDER BOLT-HOL08010 >
1/4" DIAMETERX1-1/4" SHOULDER BOLT-HOL08012 >
Dichtomatik N70463 O-Ring, 463 Dash Number, 16.955 in ID x 17.505 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Asco Redhat® 8210G003 2-Way 2-Position NC Solenoid Valve, 3/4 in Nominal, NPT End Style, 250 psi AC/125 psi DC Pressure, Brass Body
Asco Redhat® 8210G003 2-Way 2-Position NC Solenoid Valve, 3/4 in Nominal, NPT End Style, 250 psi AC/125 psi DC Pressure, Brass Body
