1/4" X 36" Square Plain Keystock
1/4" X 36" Square Plain Keystock
-
BrandGeneric
-
Manufacturer Part NumberNBS2960253600
Recently Viewed
1/4" X 36" Square Plain Keystock
Browning® 1296417 T45L Automatic Torque Limiter, 3/4 in Finished Bore, 4-1/2 in OD, 2800 in-lb (1-Spring)/4900 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
BBI 451187 Partially Threaded Cap Screw, 1-8, 9 in L Under Head, 8 Grade, Alloy Steel, Plain
BBI 451187 Partially Threaded Cap Screw, 1-8, 9 in L Under Head, 8 Grade, Alloy Steel, Plain
RIDGID® 38705 Pawl Pin, For Use With: Model 00-R Pipe and Conduit Drop-Head Threaders, Model 206 No-Hub® Soil Pipe Cutter and Model 2-S Reamer
RIDGID® 38705 Pawl Pin, For Use With: Model 00-R Pipe and Conduit Drop-Head Threaders, Model 206 No-Hub® Soil Pipe Cutter and Model 2-S Reamer
BBI 451147 Partially Threaded Cap Screw, 3/4-10, 9-1/2 in L Under Head, 8 Grade, Alloy Steel, Plain
BBI 451147 Partially Threaded Cap Screw, 3/4-10, 9-1/2 in L Under Head, 8 Grade, Alloy Steel, Plain
E7018 AC mild steel "Low Hydrogen" welding rod easily produces quality results on smaller amperage AC/DC welders. It is suitable for all positions on hardenable steels where no pre-heat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod. The low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel.
