BBI 455095 Partially Threaded Cap Screw, 5/16-18, 3-1/4 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
BBI 455095 Partially Threaded Cap Screw, 5/16-18, 3-1/4 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
-
BrandBBI
-
Manufacturer Part Number455095
-
CountryUSA
-
FinishZinc Yellow Bake CR+6
-
Tensile Strength150000 psi
-
MaterialAlloy Steel
-
Material SpecificationASTM B633-Fe, Zn5 Type 2
-
Thread TypeUNC
-
Measurement SystemImperial
-
TypePartially Threaded
-
Grade8
-
Hardness33 to 39 HRC
-
Head Size13/64 in H
-
Head TypeHex
-
Shank Size5/16 in
-
Diameter - Thread Size5/16-18
-
Length Under Head3-1/4 in
-
UNSPSC31161501
-
Package Description50/CS
-
Standards/ApprovalsASME/ANSI B18.2.1
Recently Viewed
BBI 455095 Partially Threaded Cap Screw, 5/16-18, 3-1/4 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
BBI 455095 Partially Threaded Cap Screw, 5/16-18, 3-1/4 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
BBI 455084 Partially Threaded Cap Screw, 5/16-18, 1-3/4 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
BBI 455084 Partially Threaded Cap Screw, 5/16-18, 1-3/4 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
NOTCHED GRIP V-BELTS-JASAX110>
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
72" 14/3 AIR/COND BEIGE CORDS-JWH524445>

