BBI 403110 Partially Threaded Cap Screw, 3/8-16, 1-1/2 in L Under Head, 2 Grade, Carbon Steel, Zinc CR+3
BBI 403110 Partially Threaded Cap Screw, 3/8-16, 1-1/2 in L Under Head, 2 Grade, Carbon Steel, Zinc CR+3
-
BrandBBI
-
Manufacturer Part Number403110
-
CountryUSA
-
FinishZinc CR+3
-
Tensile Strength74000 psi
-
MaterialCarbon Steel
-
Thread TypeUNC
-
Measurement SystemImperial
-
TypePartially Threaded
-
Grade2
-
Hardness80 to 100 HRB
-
Head Size15/64 in H
-
Head TypeHex
-
Shank Size3/8 in
-
Diameter - Thread Size3/8-16
-
Length Under Head1-1/2 in
-
UNSPSC31161501
-
Package Description50/CS
-
Standards/ApprovalsASME/ANSI B18.2.1 2010|ASTM Certified|SAE J429|DIN Standard
Recently Viewed
BBI 403110 Partially Threaded Cap Screw, 3/8-16, 1-1/2 in L Under Head, 2 Grade, Carbon Steel, Zinc CR+3
BBI 403110 Partially Threaded Cap Screw, 3/8-16, 1-1/2 in L Under Head, 2 Grade, Carbon Steel, Zinc CR+3
The 49-80-0292 hook nozzle can be used with all Milwaukee heat guns for bending, soldering pipe, shrinking tubing or any application where the heat needs to surround the work piece. Includes nozzle only.
Browning® 1045632 VP Series Type 2 Variable Pitch Sheave, 1-1/8 in Finished Bore, 6-1/2 in OD, 1 Groove, 4.9 to 5.9 in (A/4L)/5.2 to 6.4 in (B/5L/5V) Dia Pitch, 7/8 to 1-1/4 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
BBI 221187 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 5/8 in Dia x 3-1/2 in L Shoulder, 1/2-13
BBI 221187 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 5/8 in Dia x 3-1/2 in L Shoulder, 1/2-13
Lasco® 205-015 Nipple, 1/2 in x 1-1/2 in L Thread, PVC, SCH 80/XH, Domestic
Lasco® 205-015 Nipple, 1/2 in x 1-1/2 in L Thread, PVC, SCH 80/XH, Domestic
Browning® 1296532 T55L Automatic Torque Limiter, 1-7/16 in Finished Bore, 5-1/2 in OD, 3800 in-lb (1-Spring)/6800 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
