BBI 087010 Fully Threaded Cap Screw, 1/4-20, 1 in L Under Head, 5 Grade, Carbon Steel, Zinc CR+3
BBI 087010 Fully Threaded Cap Screw, 1/4-20, 1 in L Under Head, 5 Grade, Carbon Steel, Zinc CR+3
-
BrandBBI
-
Manufacturer Part Number087010
-
CountryUSA
-
FinishZinc CR+3
-
Tensile Strength120000 psi
-
MaterialCarbon Steel
-
Thread TypeUNC
-
Measurement SystemImperial
-
TypeFully Threaded
-
Grade5
-
Hardness25 to 34 HRC
-
Head Size5/32 in H
-
Head TypeHex
-
Diameter - Thread Size1/4-20
-
Length Under Head1 in
-
UNSPSC31161501
-
Package Description100/CS
Recently Viewed
BBI 087010 Fully Threaded Cap Screw, 1/4-20, 1 in L Under Head, 5 Grade, Carbon Steel, Zinc CR+3
BBI 087010 Fully Threaded Cap Screw, 1/4-20, 1 in L Under Head, 5 Grade, Carbon Steel, Zinc CR+3
Campbell® 6423000 GX Series Plate Clamp, 0.5 ton Load, 1/16 to 5/8 in Jaw Opening, 4 in OAW, Forged Steel, Load Activated Locking
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
MAK-A-KEY 302012-305 Metric Undersized Key Stock, 305 mm L x 20 mm W x 12 mm H, C45K Carbon Steel
A stock of material that is one foot or greater in length, and from which shaft keys are made. We manufacture keystock to suit every application need you have, in every size, grade and tolerance imaginable. Available in stocked standard sizes or custom made to your specifications.
Browning® 1296516 T55L Automatic Torque Limiter, 1-1/4 in Finished Bore, 5-1/2 in OD, 3800 in-lb (1-Spring)/6800 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
BBI 710078 Shoulder Screw, Round Socket Head, 18-8 Stainless Steel, 1/2 in Dia x 2 in L Shoulder, 3/8-16
BBI 710078 Shoulder Screw, Round Socket Head, 18-8 Stainless Steel, 1/2 in Dia x 2 in L Shoulder, 3/8-16
ROLL-A-MATIC SPONGE MOP REFILL-JWH616890 >
