19598 AUVECO
7/16" X 14" X 1-7/8" 3/4" STANDARD INSULATING BUSHING-AUV19598 >
Recently Viewed
7/16" X 14" X 1-7/8" 3/4" STANDARD INSULATING BUSHING-AUV19598 >
The kit of insulated tools incorporates all the Klein quality design and construction features that professionals have relied on. The tools combine excellent functionality along with reduction of risk of injury where a tool might make contact with an energized source with voltage up to 1000 volts. The high-dielectric white inner layer is a thick, exceptionally tough base coating which is bonded to the tool. The outer layer is a flame-resistant, bright orange color. All Klein insulated tools comply with the IEC 60900 and ASTMF 1505 standards for insulated tools. The 11045INS Insulated Wire / Stripper Cutter will strip and cut 10-18 AWG solid wire. The Wire Stripper also has holes for easily looping and bending wire. The D203-8INS 8in. Insulated Long-Nose Side Cutting Pliers have a unique slim head for working in confined areas.
The MRC R4ZZ is an inch-series, single-row radial deep groove ball bearing manufactured by MRC (a brand under SKF). It is a small Conrad-type bearing designed for high-speed industrial automation and motion control applications that handle radial and moderate thrust loads. Key Specifications Bore Diameter (Inner): 0.2500 inches (1/4 in) Outside Diameter: 0.6250 inches (5/8 in) Width: 0.196 inches (approx. 5 mm) Enclosure Type: Double shielded/sealed ("ZZ" indicates two protective closures to keep grease in and dirt out) Load Capacities: Supports a 332 lbf dynamic load and a 139 lbf static load Precision Rating: ABEC-1 standard industrial precision
2-1/8" -ID JAW COUPLING HALVES-BRWL225X21/8 >
_100x100.jpg)
123" ERECTOMATIC SHELVING T-POSTS-PNCH00610C>
McGill® 0006800000 MI Series Standard Machined Separable Inner Ring With Oil Hole and Annular Groove, 4-1/4 in ID x 4.9985 in OD, 2.26 in OAW, For Use With GUIDEROL® GR 80, CAGEROL® MR 80 Bearing, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
