POWERS 5/8" X 5" ZINC CONCRETE ANCHORS PWR 7433
The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout filled concrete masonry. The carbon steel threaded version is suitable for a variety of applications. The drill bit diameter necessary for proper installation is the same as the anchor diameter.
-
BrandDeWALTĀ®
-
UPC075352776217
-
Manufacturer Part Number7433SD1
-
CountryUSA|Canada
-
FinishZinc Plated
-
Tensile Strength5440 lb
-
Thread Length3 in
-
MaterialCarbon Steel
-
Thread Size5/8-11
-
Thread TypeUNC
-
Maximum Work Thickness1-5/8 in
-
Minimum Embedment Depth2-3/4 in
-
TypeExpansion
-
Head TypeHex
-
SeriesSD1
-
Shear Strength6815 lb
-
Diameter5/8 in
-
Drill Size5/8 in
-
Overall Length5 in
- Consistent performance in high and low strength concrete
- Length ID code and identifying marking stamped on head of each Anchor
- Ultimate load capacity: 4960 lb tensile strength when embedded in 2500 psi, 5440 lb tensile strength when embedded in 3000 psi and 6285 lb tensile strength when embedded in 4000 psi compressive strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 46U136 |
| Grainger | 46U136 |
-
Alternative Part Number7433SD1-PWR
-
UNSPSC31162102
-
Package Description25/BX
-
Standards/ApprovalsICC-ES AC01, ESR-2818/2966|UL Listed|2015 IBC/IRC|ACI 318-14 Chapter 17|ACI 318-11/08 Appendix D|ACI 355.2|ASTM E488|Evaluated and Qualified by an Accredited Independent Testing Laboratory|FM Approved|ICC-ES AC193|UL EX1289
-
Catalog
-
Specification Sheet
Recently Viewed
The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout filled concrete masonry. The carbon steel threaded version is suitable for a variety of applications. The drill bit diameter necessary for proper installation is the same as the anchor diameter.
SealmasterĀ® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or SkwezlocĀ® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlexĀ® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
1 45-D BUTT WELD BLACK ELBOW
5" MEDIUM 100-GRIT ADHESIVE-BACKED SANDING DISC--4 PACK - JWH301329 >
MCR Safety FB120 FrostbiteĀ® Safety Glasses, DuramassĀ® Hard Coat, Clear Lens, Blue, Nylon Frame, Polycarbonate Lens, ANSI Z87+, CAN/CSA Z94.3
MCR Safety FB120 FrostbiteĀ® Safety Glasses, DuramassĀ® Hard Coat, Clear Lens, Blue, Nylon Frame, Polycarbonate Lens, ANSI Z87+, CAN/CSA Z94.3
Mounted Unit 2-7/16"-ID 4-BOLT TRB FLANGE UNITS MBU FBE-920 X 2-7/16
Moline Bearing 19311207 Type E Flange Mount Bearing, 2-7/16 in Dia Bore, 5-3/8 in L Bolt Center-to-Center, 4-Bolt Flange Mount, 6-7/8 in OAL/Dia
