POWERS 1/2" X 3-3/4" CONCRETE ANCHORS PWR 7422
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
-
BrandDeWALT®
-
UPC075352776071
-
Manufacturer Part Number7422SD1
-
CountryUSA|Canada
-
FinishZinc Plated
-
Tensile Strength4155 lb
-
Thread Length2 in
-
MaterialCarbon Steel
-
Thread Size1/2-13
-
Thread TypeUNC
-
Maximum Work Thickness1 in
-
Minimum Embedment Depth2-1/4 in
-
TypeExpansion
-
Head TypeThreaded Stud
-
SeriesSD1
-
Shear Strength4195 lb
-
Diameter1/2 in
-
Overall Length3-3/4 in
- Anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete
- Ultimate load capacity: 3800 lb tensile strength when embedded in 2500 psi, 4155 lb tensile strength when embedded in 3000 psi and 4800 lb tensile strength when embedded in 4000 psi compressive strength concrete
- Suitable base materials include normal-weight concrete, structural sand-lightweight
- Anchor can be installed through standard fixture holes
- Anchor design allows for follow-up expansion after setting under tensile loading
- Nominal drill bit diameter same as Anchor diameter
- Length ID code and identifying marking stamped on head of each Anchor
-
Alternative Part Number7422SD1-PWR
-
UNSPSC31162102
-
Package Description50/BX
-
Standards/ApprovalsFM/UL Approved|2015 IBC/IRC|ACI 318-14 Chapter 17|ACI 318-11/08 Appendix D|ACI 355.2|ASTM E488|ICC-ES ESR-2818|ICC-ES ESR-2966|Evaluated and Qualified by an Accredited Independent Testing Laboratory|ICC-ES AC193|UL EX1289
-
Catalog
-
Specification Sheet
Recently Viewed
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
50 PIECE 5/32" HAIR PIN CLIP-JWH736500 >
The Screw-Bolt+™ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+™ finish is available in bright zinc plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
LINEAR BEARING GUIDE - NSKLAW21EL20>
ALAN 14-THHN BLUE STRANDED WIRE. THE THHN CONDUCTORS ARE PRIMARILY USED IN CONDUIT AS BRANCH CIRCUITS IN COMMERCIAL OR INDUSTRIAL APPLICATIONS.
TYPE THHN IS AVAILABLE STRANDED IN SIZES 14 AWG -750 KCMIT. THE CONDUCTORS ARE SOFT-ANNEALED, STRANDED OR SOLID COPPER AND ARE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKSON IS APPLIED.
-ALE14THHNBLU >
