DeWALT® Screw-Bolt™ PFM1411600 1-Piece Heavy Duty High Performance Screw Anchor, 5/8 in Dia, 5 in OAL, Hex Washer Head Drive, Carbon Steel, 2-1/2 in D Min Embedment
The Screw-Bolt™ anchor is a 1-piece, heavy duty Screw Anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt™ is available as bright zinc plated or mechanically galvanized plating. Suitable base materials include normal weight concrete.
-
BrandDeWALT®
-
UPC075352305103
-
Manufacturer Part NumberPFM1411600
-
CountryUSA|Canada
-
FinishZinc Plated
-
MaterialCarbon Steel
-
Minimum Embedment Depth2-1/2 in
-
Type1-Piece Heavy Duty High Performance
-
Head Drive TypeHex Washer
-
Head Size37/64 in H
-
Applicable MaterialsBrick Masonry, Concrete Over Steel Deck, Grouted Concrete Masonry, Lightweight Concrete and Normal Weight Concrete
-
Diameter5/8 in
-
Drill Size5/8 in
-
Overall Length5 in
- Designed for standard ANSI tolerance drill bits
- Low installation torque in concrete and masonry
- Ratchet teeth on underside of hex washer head lock against the fixture
- Fully removable and reinstallable in same hole
- Diameter, length and identifying marking stamped on head of each anchor
- Patented thread design offers toughened threads for tapping high strength concrete
- Universal product for concrete and grouted/solid masonry
- Can be installed closer to a free edge than traditional expansion anchors
- Fast installation with powered impact wrench, but can also be installed manually
- 1-piece, finished head design
| Competitor Name | Competitor Part Number |
|---|---|
| Fastenal | 11572561 |
-
UNSPSC31161526
-
Standards/ApprovalsACI 318|ACI 355.2|ASTM E488|ASTM B633, SC1 Type II|ESR-388|ESR-4042|IBC/IRC 2018/2015/2012/2009|ICC-ES AC193
-
Specification Sheet
Recently Viewed
DeWALT® Screw-Bolt™ PFM1411600 1-Piece Heavy Duty High Performance Screw Anchor, 5/8 in Dia, 5 in OAL, Hex Washer Head Drive, Carbon Steel, 2-1/2 in D Min Embedment
The Screw-Bolt™ anchor is a 1-piece, heavy duty Screw Anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt™ is available as bright zinc plated or mechanically galvanized plating. Suitable base materials include normal weight concrete.
FILTER BAG-NFM44FK27063>
BBI 042150 Partially Threaded Cap Screw, 3/8-16, 2-1/2 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
BBI 042150 Partially Threaded Cap Screw, 3/8-16, 2-1/2 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
1/8" X 12" Square Plain Keystock
The Littelfuse® LGR and LMF series fuses and LHR holder offer increased safety and reliability to lighting systems. on a 277 volt system, a fault occurring in an un-fused fixture could take out the entire branch circuit affecting upto 100 fixtures. this could cause safety problems as well as shut down operations. by individually fusing fixtures, these problems will be avoided. The added benefits of this is the ability to quickly identify the problem fixture and reduce the repair time. fuse holders are rated upto 10 A at 300 V and are equipped with 7 18 AWG leads. Order part number LHR 000 for two leads and part number LHR 001 for one lead and one terminal for insertion of 18 AWG ballast lead.
Leviton® 430P7W Watertight Pin And Sleeve Plug, 480 VAC, 30 A, 3 Poles, 4 Wires, Red
Leviton® 430P7W Watertight Pin And Sleeve Plug, 480 VAC, 30 A, 3 Poles, 4 Wires, Red
