Greenlee® 866 Anchor Expander Assembly, #10-24 Expansive Belt, For Use With 84299 Caulking Anchor, Hardened Alloy Steel
Greenlee® 866 Anchor Expander Assembly, #10-24 Expansive Belt, For Use With 84299 Caulking Anchor, Hardened Alloy Steel
-
BrandGreenlee®
-
UPC783310026679
-
Manufacturer Part Number866
-
CountryUSA
-
MaterialHardened Alloy Steel
-
Specifications#10-24 Expansive Belt
-
Suitable For Use With84299 Caulking Anchor
- Quickly and securely set expansive screw anchors in masonry, regardless of thickness
- Replacement part: 4451AV anchor screw for 866, 1125GB 1/4 x 1-1/8 in roll pin
-
Alternative Part Number02667|8373546
-
UNSPSC27112404
-
IDEA Index ID8373546
-
Package DescriptionEACH
-
Standards/ApprovalsARRA Compliant
-
WarrantyLimited
-
Warranty Information
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Greenlee® 866 Anchor Expander Assembly, #10-24 Expansive Belt, For Use With 84299 Caulking Anchor, Hardened Alloy Steel
Greenlee® 866 Anchor Expander Assembly, #10-24 Expansive Belt, For Use With 84299 Caulking Anchor, Hardened Alloy Steel
AIR FILTERS
Dodge® 124460 204 Normal Duty Pillow Block Ball Bearing Unit, 1/2 in Dia Bore, 2 in L Bolt Center-to-Center, 1.31 in Base to Bore Centerline, 2.88 in OAL x 2.56 in OAH
A setscrew shaft attachment method is the most common means of securing a mounted ball bearing to a shaft and also the easiest to install. The Dodge® mounted ball bearing offering is engineered with a 65 deg setscrew angle. This ensures the maximum grip onto the shaft, especially when using premium cup point set screws with the high quality manufacturing of the Dodge® insert.
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
Browning® 1109776 Single Strand Plate Type A Roller Chain Sprocket With Hardened Teeth, 15/16 in Dia Bore, 3.35 in OD, #80 Chain, 9 Teeth, 1 in Pitch, Steel
Browning® 1109776 Single Strand Plate Type A Roller Chain Sprocket With Hardened Teeth, 15/16 in Dia Bore, 3.35 in OD, #80 Chain, 9 Teeth, 1 in Pitch, Steel
Browning® torque limiters are torque control devices that slip under excessive load but automatically carry the desired load after the excess has been removed. The device can be easily adjusted to slip at a desired overload and automatically re-engage when overload is removed. Overload should be removed promptly since prolonged slippage can be detrimental to the friction disc. Generally, no resetting is required after the torque limiter has slipped. Torque limiters help prevent machine and product damage and costly downtime caused by shock loads, overloads or machine jams but should not be used as clutches.
