TPC-300 APPLETON
3" 3-PC RIDGID CONDUIT UNIONS-APLTPC300>
Recently Viewed
3" 3-PC RIDGID CONDUIT UNIONS-APLTPC300>
RIDGID® 38155 Pipe Die, 4 to 6 in Conduit/Pipe, 4-6-8 NPT Thread, Right Thread, For Use With 141 Geared Pipe Threader, HSS
RIDGID® 38155 Pipe Die, 4 to 6 in Conduit/Pipe, 4-6-8 NPT Thread, Right Thread, For Use With 141 Geared Pipe Threader, HSS
BANJO SL-125-45 1-1/4" MNPT X 1-1/4" FNPT POLY 45 DEGREE STREET ELBOW
45 DEGREE STREET ELBOW FOR CONNECTING A MALE-ENDED AND FEMALE-ENDED PIPE AT AN ANGLE, MALE NPT THREADS ON ONE END AND FEMALE NPT THREADS ON THE OTHER FOR CONNECTING PIPES WITH DIFFERENT ENDS. PRECISION MOLDED IN STERILIZABLE POLYPROPYLENE FOR DIMENSIONAL STABILITY AND REINFORCED WITH FIBERGLASS FOR ADDED DURABILITY, STRENGTH, AND CHEMICAL RESISTANCE. HANDLES PRESSURE UP TO 300 PSI. SCHEDULE 80 POLYPROPYLENE FOR A THICKER WALL THAN SCHEDULE 40
-BAJSL12545 >
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
GEARWRENCH® 9608N Open End Regular Length Reversible Combination Wrench, 8 mm Wrench, 12 Points, 15 deg Offset, 5.433 in OAL, High Alloy Steel, Polished Chrome
The reversible ratcheting combination wrenches from GEARWRENCH® are a staple for every tool box. The flush-mounted reversing lever allows the user to switch motion left to right without needing to remove the wrench from the fastener increasing productivity. The 15 deg offset on the ratcheting box end allows for greater knuckle clearance and safer access to the fasteners. The ratcheting box end is designed to need as little as 5 deg to move fasteners versus 30 deg for standard wrenches and features off-corner loading for a better grip on the fastener and reduces fastener rounding. The wrenches are made from strong alloy steel with a bright, full polish chrome finish.
Southwire® 13056755 Type UF-B Underground Feeder Cable With Grounding Wire, 600 V AC, (2) 10 AWG Copper Conductor, 250 ft L
Southwire® copper UF-B cable is generally used as feeder to outside post lamps, pumps, and other loads or apparatus fed from a distribution point in an existing building as specified in the 2011 National Electrical Code. UF-B cable may be used underground, including direct burial. Multiple conductor UF-B cable may be used for interior branch circuit wiring in residential or agricultural buildings at conductor temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified by the National Electrical Code. UF-B can be used in applications permitted for NMC in Section 334.10(B) of the National Electrical Code. Voltage rating for UF-B cable is 600 volts.
