Appleton® ETP™ 8371N Raised Square Box Cover, 4 in L x 4 in W x 1/2 in D, Duplex Receptacle Cover, Steel
Appleton® ETP™ 8371N Raised Square Box Cover, 4 in L x 4 in W x 1/2 in D, Duplex Receptacle Cover, Steel
-
BrandAppleton®
-
UPC687855703029
-
Manufacturer Part Number8371N
-
CountryUSA
-
Capacity7 cu-in
-
FinishGalvanized
-
MaterialSteel
-
TypeRaised
-
Mounting TypeSurface
-
Cover TypeDuplex Receptacle
-
Width4 in
-
Number of Gangs2
-
ShapeSquared
-
Depth1/2 in
-
Length4 in
- Boxes with concentric or eccentric knockouts are suitable for bonding without any additional bonding means where used in circuits above or below 250 VAC
- Unless otherwise noted all concentric or eccentric knockouts are 1/2 to 3/4 in combinations
- Single and double gang metallic outlet and switch boxes are acceptable for use in two hr fire rated walls
- Groundskeeper raised ground feature on boss inside box provides one or two #10-32 tapped hole, allowing a 3/8 in long green ground screw to be threaded into box without contacting mounting surface
- Other boxes provided with flat ground tapped hole, except plenum boxes
- 1/2 in raise for two duplex flush receptacle
- Extra mounting screws and nuts provided
-
Alternative Part Number8993747
-
UNSPSC39121304
-
IDEA Index ID8993747
-
Package DescriptionEACH
-
Standards/ApprovalsARRA Compliant|Buy American Act Compliant|RoHS Compliant|UL 514A File No. E2527|NEMA OS-1
-
Specification Sheet
Recently Viewed
Appleton® ETP™ 8371N Raised Square Box Cover, 4 in L x 4 in W x 1/2 in D, Duplex Receptacle Cover, Steel
Appleton® ETP™ 8371N Raised Square Box Cover, 4 in L x 4 in W x 1/2 in D, Duplex Receptacle Cover, Steel
#7 X 1/2" Flat Head Slotted Wood Screw
Browning®Type B minimum bore sprockets are offered in single, double and triple strands. Offerings include 25 to 200 pitch range. Minimum bore sprockets are available in bore ranges from 1/4 to 8-3/8 in.
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
Browning® Classical Gripbelt® 1028190 BK Series Type 2 Single Groove Sheave, Finished Bore, 1/2 in Dia Bore, 3.95 in OD, 3.4 in (A)/3.9 in (B) Dia Pitch, 7/8 in W Face
Apex® AM-04-3 Socket Head Power Drive Bit, 1/8 in Hex Point, 3 in OAL, Steel
