Carlon® E979DFNR Type FSCC Rigid Device Box, PVC, 18 cu-in Capacity, 1 Gangs, 4.54 in L x 2.8 in W x 2.42 in D
Carlon® E979DFNR Type FSCC Rigid Device Box, PVC, 18 cu-in Capacity, 1 Gangs, 4.54 in L x 2.8 in W x 2.42 in D
-
BrandCarlon®
-
UPC034481190400
-
Manufacturer Part NumberE979DFNR
-
CountryUSA
-
Capacity18 cu-in
-
MaterialPVC
-
ColorGray
-
TypeType FSCC
-
Number of Gangs1
-
Hub Size1/2 in
-
Dimensions4.54 in L x 2.8 in W x 2.42 in D
- All sizes take standard covers and accessories or devices
-
Alternative Part Number7TAA232440R0028|10748082
-
UNSPSC39121332
-
IDEA Index ID10748082
-
Package DescriptionEACH
-
Standards/ApprovalsUL E11461 / UL E11461
-
Specification Sheet
Recently Viewed
Carlon® E979DFNR Type FSCC Rigid Device Box, PVC, 18 cu-in Capacity, 1 Gangs, 4.54 in L x 2.8 in W x 2.42 in D
Carlon® E979DFNR Type FSCC Rigid Device Box, PVC, 18 cu-in Capacity, 1 Gangs, 4.54 in L x 2.8 in W x 2.42 in D
Browning® 1304922 Hardened and Ground Replacement Liner
Sioux Chief Raise-A-Ring™ 886-R Spacer/Extension Ring, ABS
Installers use Sioux Chief's spacer and repair rings to repair or adapt closet flanges for specific applications, such as when new or thicker flooring is added. The Quick Spacer™ installs under the flange, while the Raise-A-Ring™ is typically set on top of the flange, and can be stacked if necessary. For repairs to cracked or broken flanges, installers can fit Sioux Chief's stainless steel Ringer™ over the damaged flange and fasten it to the floor. Also available is a two-piece repair ring, designed to replace rusted or broken metal swivel rings without replacing the plastic portion of the flange.
METRIC V-BELTS-PIXSPA1120>
Used as in-line protection for fluorescent fixtures, the Littelfuse® LGR and LMF series fuses and LHR holder offer increased safety and reliability to lighting systems. On a 277 VAC system, a fault occurring in an un-fused fixture could take out the entire branch circuit affecting upto 100 fixtures. This could cause safety problems as well as shut down operations. By individually fusing fixtures, these problems will be avoided. The added benefits of this is the ability to quickly identify the problem fixture and reduce the repair time. Fuse holders are rated upto 10 A at 300 VAC and are equipped with 7 in 18 AWG leads. Order part number LHR 000 for two leads and part number LHR 001 for one lead and one terminal for insertion of 18 AWG ballast lead.
TRANSFER TABLE SPRING LOADED BALLS-GEN423301>
