Appleton® UNILETS™ FDC150 Type FDC Deep Heavy Duty Device Box With Internal Ground Screw, Malleable Iron, 25 cu-in Capacity, 1 Gangs, 2 Outlets, 2 Knockouts, 4.56 in H x 2.81 in W x 2.69 in D
Appleton® UNILETS™ FDC150 Type FDC Deep Heavy Duty Device Box With Internal Ground Screw, Malleable Iron, 25 cu-in Capacity, 1 Gangs, 2 Outlets, 2 Knockouts, 4.56 in H x 2.81 in W x 2.69 in D
-
BrandAppleton®
-
UPC781381335355
-
Manufacturer Part NumberFDC150
-
CountryUSA|Canada
-
Cable Entry SizeKnockout
-
Capacity25 cu-in
-
FinishTri-Coated
-
MaterialMalleable Iron
-
TypeType FDC Deep Heavy Duty
-
Number of Gangs1
-
Hub Size1/2 in
-
Hub StyleTapered Threaded
-
Number of Knockouts2
-
Number of Outlets2
-
Dimensions4.56 in H x 2.81 in W x 2.69 in D
-
Enclosure TypeNEMA FB-1
- Corrosion-resistant ideal for indoor and outdoor installations
- Weatherproof, raintight and dust tight when used with cast gasketed covers
- FS and FD boxes take standard flush wiring devices
- FD boxes take devices exceeding 1.63/41.4 mm in depth under fastening ears
- Malleable iron for high tensile strength and ductility provides greater resistance to impact and shock
- Both malleable iron and aluminum boxes have ridge top construction for positive cover/gasket/box fit
- Accurately tapped, tapered threads for tight, rigid joints and ground continuity
- Complete selection of covers, receptacles, plugs, gaskets and accessories
- Covers have captive stainless steel screws to speed installation, prevents loss of screws
- Smooth, rounded integral bushing in each hub protects conductor insulation
- Accommodate wiring devices such as switches and receptacles
- Provide excellent service in areas where boxes are subject to rough usage
- Serve as pull boxes for conductors
- Permit access to conductors for maintece
- Provide openings for making splices
- Allow connections for branch conduit runs
- Blank bodies for special conduit entrance arrangements
- Without knockouts
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 5E794 |
-
Alternative Part Number8335068
-
UNSPSC39121315
-
IDEA Index ID8335068
-
Package DescriptionEACH
-
Standards/ApprovalsARRA Compliant|UL 514A File No. E2527|CSA C22.2 No. 18.1/001472|NEMA FB-1
-
Warranty1 Year
-
Warranty Information
-
Specification Sheet
Recently Viewed
Appleton® UNILETS™ FDC150 Type FDC Deep Heavy Duty Device Box With Internal Ground Screw, Malleable Iron, 25 cu-in Capacity, 1 Gangs, 2 Outlets, 2 Knockouts, 4.56 in H x 2.81 in W x 2.69 in D
GP® 3028D Deep Length Socket, 3/4 in, 7/8 in Hex Socket, 6 Points
Greenlee® Slug-Buster® 36282 Round Standard Replacement Knockout Punch, 1-7/32 in Dia
Greenlee® Slug-Buster® 36282 Round Standard Replacement Knockout Punch, 1-7/32 in Dia
Milwaukee® 48-62-3010 Flat Chisel, 3/4 in Hex Shank, 1 in W Blade, 12 in OAL
Drop forged of high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete. One per package.
6" STEEL VISES-JET373906>
Milwaukee® M18™ 48-59-1806 Sequential Charger, For Use With M18™ Battery, Li-Ion Battery, 0.5 to 1 hr Charging, 6 Batteries
The Milwaukee 48-59-1806 is a M18 sequential 6 port charger. The charger holds up to 6 batteries at a time, and charges them sequentially, one at a time. The charger also offers a compact design, integrated hang holes for vertical mounting, and a pass through plug to conserve outlet space. The new unit will charge M18 compact batteries in 30 minutes, and extended capacity (XC) batteries in 60 minutes. With this new six pack charger, users can reduce the amount of time spent changing out batteries, increasing productivity on the jobsite.
